Fundamental properties of epoxy resin-modified cement grouts

被引:93
作者
Anagnostopoulos, Costas A. [1 ]
Sapidis, Giorgos [1 ]
Papastergiadis, Efthimios [2 ]
机构
[1] Alexander Technol Educ Inst Thessaloniki, Sch Technol Applicat, Dept Civil Engn, Thessaloniki 57400, Greece
[2] Alexander Technol Educ Inst Thessaloniki, Sch Agr Technol Food Technol & Nutr, Dept Food Technol, Thessaloniki 57400, Greece
关键词
Epoxy resin; Polycarboxylate ether superplasticiser; Cement grouts; Strength; MECHANICAL-PROPERTIES; RHEOLOGICAL BEHAVIOR; MODIFIED CONCRETE; MODIFIED MORTARS; SETTING TIME; MIX-DESIGN; SUPERPLASTICIZERS; DURABILITY; PASTES;
D O I
10.1016/j.conbuildmat.2016.08.050
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The use of additives to improve the quality of cement grouts and their effects on strength, durability and resistance to chemical erosion of grouted soil or rock mass is crucial for geotechnical engineering, especially in foundation construction. The main objective of the current laboratory project was to comprehensively investigate the potential use of a two-component water soluble epoxy resin to improve the properties of thick superplasticised cement grouts. The experiments were conducted using different epoxy resin dosages with cement grouts proportioned with a water to cement ratio of 0.5, 0.4 and 0.33. The results indicated that the addition of epoxy resin increases the 28- and 90-day compressive strength, splitting tensile strength and elastic modulus by up to 21%, 84% and 190%, respectively, despite the extension of the setting time. Additionally, the toughness, stability and resistance to acid attack of epoxy resin-modified grouts appeared to improve significantly. On the other hand, grouts containing epoxy resin exhibited higher viscosity and yield stress values ranging from 0.09 to 0.67 Pa s and 10-45 Pa, respectively. This has to be considered when the viscosity of the grout is essential.. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:184 / 195
页数:12
相关论文
共 53 条
[1]  
ACI Committee 548, 2003, 548 ACI COMM
[2]   Properties of polymer-modified mortars using epoxy and acrylic emulsions [J].
Aggarwal, L. K. ;
Thapliyal, P. C. ;
Karade, S. R. .
CONSTRUCTION AND BUILDING MATERIALS, 2007, 21 (02) :379-383
[3]  
Akbulut S., 2003, Ground Improv, V7, P37
[4]   STRENGTH AND DURABILITY OF POLYPROPYLENE FIBER-REINFORCED GROUTS [J].
ALLAN, ML ;
KUKACKA, LE .
CEMENT AND CONCRETE RESEARCH, 1995, 25 (03) :511-521
[5]   Rheology of latex-modified grouts [J].
Allan, ML .
CEMENT AND CONCRETE RESEARCH, 1997, 27 (12) :1875-1884
[6]   Laboratory study of an injected granular soil with polymer grouts [J].
Anagnostopoulos, CA .
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2005, 20 (06) :525-533
[7]   Cement-clay grouts modified with acrylic resin or methyl methacrylate ester: Physical and mechanical properties [J].
Anagnostopoulos, Costas A. .
CONSTRUCTION AND BUILDING MATERIALS, 2007, 21 (02) :252-257
[8]   Effect of superplasticiser type on the properties of cement grouts [J].
Anagnostopoulos, Costas A. .
ADVANCES IN CEMENT RESEARCH, 2015, 27 (05) :297-307
[9]   Effect of different superplasticisers on the physical and mechanical properties of cement grouts [J].
Anagnostopoulos, Costas A. .
CONSTRUCTION AND BUILDING MATERIALS, 2014, 50 :162-168
[10]  
[Anonymous], 1987, INTRO ORGANIC SPECTR