Formation of Rare Earth Intermetallics in Al-Cu Cast Alloys

被引：1
作者：
Mahmoud, M. G. [1 ]
Samuel, A. M. [2 ]
Doty, H. W. [3 ]
Samuel, F. H. [2 ]
机构：
[1] Cairo Univ, Fac Engn, Mech Design & Prod Dept, Giza, Egypt
[2] Univ Quebec Chicoutimi, Dept Sci Appl, Saguenay, PQ, Canada
[3] Gen Motors Mat Engn, 823 Joslyn Ave, Pontiac, MI 48340 USA
来源：
LIGHT METALS 2020 | 2020年
关键词：
Rare earth (RE) metals; Ce; La; Al-Cu alloy; Solidification rate; EPMA; WDS analysis; HEAT-TREATMENT; COOLING RATE; A356.2; MISCHMETAL; A319.1;
D O I：
10.1007/978-3-030-36408-3_34
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
The present research study aimed at investigating the effect of additions of Ce and La rare earth (RE) elements on intermetallic formation in Al-1.2Si-2.4Cu-0.4 Mg-0.4 Fe-0.6Mn-0.15Ti (wt%) alloy, coded B0. Microstructural characteristics were examined under low solidification rate (similar to 0.7 degrees C/s). The result show that two main types of RE-containing intermetallic phases were formed: (i) a grey phase in the form of sludge, with a fixed composition Al21Ti2RE (Ce/La), and (ii) white RE-containing intermetallic phases (resulting from reaction of the RE (Ce/La) with Si, Fe, and Cu); the latter exhibited several compositions: Al11RE(Ce/La)(3)(Cu,Fe)(4)Si-2, Al4Ce3Si2, Al5La3Si2 and Al6La2(Cu,Fe)(2)Si.
引用
收藏
页码：241 / 246
页数：6
相关论文
共 15 条
[1]   Effect of Rare Earth Metals on the Microstructure of Al-Si Based Alloys [J].
Alkahtani, Saleh A. ;
Elgallad, Emad M. ;
Tash, Mahmoud M. ;
Samuel, Agnes M. ;
Samuel, Fawzy H. .
MATERIALS, 2016, 9 (01)
[2]  
[Anonymous], 2019, IETE J RES, DOI DOI 10.1080/03772063.2019.1644211
[3]   The effects of mischmetal, cooling rate and heat treatment on the hardness of A319.1 A356.2 and A413.1 Al-Si casting alloys [J].
El Sebaie, O. ;
Samuel, A. M. ;
Samuel, F. H. ;
Doty, H. W. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 486 (1-2) :241-252
[4]   The effects of mischmetal, cooling rate and heat treatment on the eutectic Si particle characteristics of A319.1, A356.2 and A413.1 Al-Si casting alloys [J].
El Sebaie, O. ;
Samuel, A. M. ;
Samuel, F. H. ;
Doty, H. W. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 480 (1-2) :342-355
[5]   Microstructural characterisation of Al-Si cast alloys containing rare earth additions [J].
Elgallad, E. M. ;
Ibrahim, M. F. ;
Doty, H. W. ;
Samuel, F. H. .
PHILOSOPHICAL MAGAZINE, 2018, 98 (15) :1337-1359
[6]   Effects of La and Ce Addition on the Modification of Al-Si Based Alloys [J].
Elgallad, Emad M. ;
Doty, Herbert W. ;
Alkahtani, Saleh A. ;
Samuel, Fawzy H. .
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2016, 2016
[7]  
LEXINGTON Ky, 2017, UK RES 1 PRODUCE HIG
[8]   Effect of Solidification Rate and Rare Earth Metal Addition on the Microstructural Characteristics and Porosity Formation in A356 Alloy [J].
Mahmoud, M. G. ;
Samuel, A. M. ;
Doty, H. W. ;
Valtierra, S. ;
Samuel, F. H. .
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 2017
[9]   Effect of Rare Earth Metals, Sr, and Ti Addition on the Microstructural Characterization of A413.1 Alloy [J].
Mahmoud, M. G. ;
Samuel, A. M. ;
Doty, H. W. ;
Valtierra, S. ;
Samuel, F. H. .
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 2017
[10]   Role of cerium, lanthanum, and strontium additions in an Al-Si-Mg (A356) alloy [J].
Nabawy, Ahmed M. ;
Samuel, Agnes M. ;
Alkahtani, Saleh A. ;
Abuhasel, Khaled A. ;
Samuel, Fawzy H. .
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2016, 107 (05) :446-458
12