Investigation on microstructural and mechanical properties of Cu reinforced with Sic composites prepared by microwave sintering process

被引：63

作者：

Sathish, T. ^{[1
]}

Chandramohan, D. ^{[1
]}

Vijayan, V. ^{[2
]}

Sebastian, P. J. ^{[3
]}

机构：

[1] St Peters Inst Higher Educ & Res, Dept Mech Engn, Chennai 600054, Tamil Nadu, India

[2] K Ramakrishanan Coll Technol, Dept Mech Engn, Trichy 621112, Tamil Nadu, India

[3] UNAM, Inst Energias Renovables, Temixco 62580, Morelos, Mexico

来源：

JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS | 2019年 / 22卷 / 01期

关键词：

Copper; silicon carbide; graphite; hardness test; compressive test; microstructure test; PARTICLE-SIZE; COPPER;

D O I：

10.14447/jnmes.v22i1.a02

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

In this present experimental studysix different metal matrix composites has been fabricated using pure copper (Cu) as a base material reinforced with silicon carbide (Sic) and graphite as one of the additives each time i.e., different volume fractions Sic and graphite. Powder state mixing technique was employed for the different constituent. After mixing, powders were poured in metallic die then specimens are sintered through Microwave sintering (2.45 GHz, 3.2 kW) and various tests such as hardness, compressive and microstructure of the composite specimens has been carried out.

引用

页码：5 / 9

页数：5

共 50 条

[41] Preparation and Thermoelectric Properties of SiC Matrix Composites Prepared under a Low Sintering Temperature
Li, Mingliang
Wang, Hailong
Zhang, Rui
Li, Jing
Li, Junhao
CHINESE CERAMICS COMMUNICATIONS, 2010, 105-106 : 333 - 335
[42] Microstructural and mechanical properties of copper matrix composites
Madhesh, D.
Jagatheesan, K.
Sathish, T.
Balamanikandasuthan, K.
MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 1437 - 1441
[43] Microstructure and mechanical properties of Cu-ZTA cermet prepared by vacuum hot pressing sintering
Sun, Da-Ming
Jiang, Xiao-song
Sun, Hong-liang
Song, Ting-feng
Luo, Zhi-ping
MATERIALS RESEARCH EXPRESS, 2020, 7 (02)
[44] Interface diffusion and mechanical properties of ODS-W/Cu prepared by spark plasma sintering
Liu, Dong-Guang
Ma, Hao-Ran
Ruan, Chong-Fei
Luo, Lai-Ma
Ma, Yong
Wang, Zu-Min
Wu, Yu-Cheng
VACUUM, 2021, 190
[45] Mechanical and thermal properties of ZrC/ZTA composites prepared by spark plasma sintering
Li, Shufen
Niu, Lijuan
Zhu, Yabin
Chai, Jianlong
Wang, Zhiguang
Xie, Erqing
CERAMICS INTERNATIONAL, 2022, 48 (05) : 6453 - 6460
[46] Investigation of mechanical properties and microstructural evolution in Cu-Al alloys with gradient structure
Li, Xingfu
Nakatani, Masashi
Yang, Jingran
Zhang, Jinxu
Sharma, Bhupendra
Pan, Hongjiang
Ameyama, Kei
Fang, Junqi
Zhu, Xinkun
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 890
[47] Consequence of reinforced SiC particles on microstructural and mechanical properties of AA6061 surface composites by multi-pass FSP
Mehdi, Husain
Mishra, R. S.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2022, 36 (12) : 1279 - 1298
[48] Microstructural Effects on the Mechanical Properties of SiC-15 vol% TiB2 Particulate-Reinforced Ceramic Composites
King, Derek S.
Fahrenholtz, William G.
Hilmas, Greg E.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2013, 96 (02) : 577 - 583
[49] Microstructural and wear characterizations of Ultra-Dispersed Diamond (UDD) reinforced Cu-15 wt.% Ti composites fabricated via mechanical alloying and sintering
Kaftelen, H.
Ovecoglu, M. L.
KOVOVE MATERIALY-METALLIC MATERIALS, 2017, 55 (03): : 149 - 159
[50] Development and investigation of densification behavior of ZrB2-SiC composites through microwave sintering
Sharma, Ankur
Karunakar, D. B.
MATERIALS RESEARCH EXPRESS, 2019, 6 (10):

← 1 2 3 4 5 →