Ultrasonic torsion welding of sheet metals to cellular metallic materials

One of the most important requirements for finding new applications for cellular metals is to integrate them in complex technical structures. The metal foams have to be joined to each other, or to sheet materials, by suitable joining techniques. The main topics of this paper are the ultrasonic torsion welding Of cellular, metallic materials to sheet metals and the investigation of the mechanical properties of the joints The basic materials of foams and sheet metals were different aluminum and iron alloys. Depending on the materials used, weldings with tensile shear strengths of up to 25 MPa were realized. Using aluminum foam sandwich (AFS) and sheet metals, successful weldings were performed before and after the foaming process. Furthermore, it was possible to perform a successful foaming process with the unfoamed AFS/sheet metal joints. Microscopic investigations showed that the ultrasonic welding technique allows the joining of the metal foams with sheet metals without significant deformation of the joining partners. The temperatures during the welding process in the interface were below the melting point of the foams and the sheet metals.