Hybrid laser/arc welding process for controlling bead profile

A laser hybrid welding process in which a defocused laser beam is applied beside a gas metal arc weld (GMAW) pool to modify the bead shape was studied. The present paper aims to produce welds with improved toe geometry and better fatigue life than those made with GMAW alone and to apply a numerical simulation to help configure the hybrid process. First, stationary hybrid welds were made to validate weld bead shape predictions and to characterise the spreading of the arc weld deposit to the laser heated spot. Next, the travelling hybrid process was configured with the aid of simulations and fatigue test specimens were welded. Proper application of the laser heat input induced molten metal to spread to the laser heated area, increasing the fillet weld leg length. This produced a larger weld toe angle that decreased the stress concentration and increased the fatigue life of the welds relative to standard mean values.