Experimental study of cooling enhancement using a Fe3O4 magnetic nanofluid, in an applied magnetic field

被引:7
|
作者
Stoian, F. D. [1 ]
Holotescu, S.
机构
[1] Politehn Univ Timisoara, Fac Mech Engn, 1 Mihai Viteazu Bv, Timisoara 300222, Romania
关键词
D O I
10.1088/1742-6596/547/1/012044
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
This paper presents the results of an experimental study that envisaged the evaluation of the cooling capabilities of a transformer oil based magnetic nanofluid with the solid volume fraction of magnetite nanoparticles equal to 0.0162, in an AC applied magnetic field (f = 50 Hz). The heating and cooling regimes of a coil immersed in the magnetic nanofluid were compared to that corresponding to the base fluid (transformer oil). The results of our study indicate that the temperature rise rate of the magnetic nanofluid is lower than that corresponding to the transformer oil and a lower stationary temperature is obtained in the coil core, where the magnetic flux density is the largest.
引用
收藏
页数:8
相关论文
共 50 条
  • [1] Investigation on viscosity of Fe3O4 nanofluid under magnetic field
    Wang, Lijun
    Wang, Yongheng
    Yan, Xiaokang
    Wang, Xinyong
    Feng, Biao
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2016, 72 : 23 - 28
  • [2] Experimental Study of Natural Convection Enhancement Using a Fe3O4-Water Based Magnetic Nanofluid
    Stoian, Floriana D.
    Holotescu, Sorin
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2012, 12 (10) : 8211 - 8214
  • [3] Photonic crystal fiber injected with Fe3O4 nanofluid for magnetic field detection
    Thakur, Harneet V.
    Nalawade, Sandipan M.
    Gupta, Swati
    Kitture, Rohini
    Kale, S. N.
    APPLIED PHYSICS LETTERS, 2011, 99 (16)
  • [4] A study on lubrication and cooling performance and machining characteristics of magnetic field–assisted minimum quantity lubrication using Fe3O4 nanofluid as cutting fluid
    Tao Lv
    Xuefeng Xu
    Haizhou Weng
    Aibing Yu
    Chengcheng Niu
    Xiaodong Hu
    The International Journal of Advanced Manufacturing Technology, 2022, 123 : 3857 - 3869
  • [5] Experimental investigation of the photo-thermal conversion performance of Fe3O4 nanofluid under a magnetic field
    Boldoo, Tsogtbilegt
    Ham, Jeonggyun
    Cho, Honghyun
    INTERNATIONAL JOURNAL OF NANOTECHNOLOGY, 2019, 16 (4-5) : 244 - 250
  • [6] Heat transfer enhancement of Fe3O4 ferrofluids in the presence of magnetic field
    Fadaei, Farzad
    Shahrokhi, Mohammad
    Dehkordi, Asghar Molaei
    Abbasi, Zeinab
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2017, 429 : 314 - 323
  • [7] Numerical Study on the Mechanism of Heat Transfer Enhancement in Fe3O4 Nanoferrofluids with Magnetic Field
    Wang, Chenfei
    Gao, Dongdong
    Bai, Minli
    Wang, Peng
    Li, Yubai
    PROCEEDINGS OF THE ASME 6TH INTERNATIONAL CONFERENCE ON MICRO/NANOSCALE HEAT AND MASS TRANSFER, 2019, 2019,
  • [8] A study on lubrication and cooling performance and machining characteristics of magnetic field-assisted minimum quantity lubrication using Fe3O4 nanofluid as cutting fluid
    Lv, Tao
    Xu, Xuefeng
    Weng, Haizhou
    Yu, Aibing
    Niu, Chengcheng
    Hu, Xiaodong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 123 (11-12): : 3857 - 3869
  • [9] High field surface magnetic study of Fe3O4 nanoparticles
    Kihal, A.
    Fillion, G.
    Bouzabata, B.
    Barbara, B.
    PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 2012, 249 (03): : 604 - 614
  • [10] Preparation and Characterization of Fe3O4 Magnetic Nanofluid in Vegetable Oil
    Malaeru, Teodora
    Patroi, Eros Alexandru
    Marinescu, Virgil
    Oprea, Ovidiu
    Patroi, Delia
    Morari, Cristian
    Manta, Eugen
    Georgescu, Gabriela
    REVISTA DE CHIMIE, 2019, 70 (02): : 459 - 464