PRESTRAIN INFLUENCE ON FATIGUE CRACK PROPAGATION IN A 304L STAINLESS STEEL

被引：0
|
作者：
Vor, Kokleang [1 ]
Gardin, Catherine [1 ]
Sarrazin-Baudoux, Christine [1 ]
Petit, Jean [1 ]
Amzallag, Claude
机构：
[1] ENSMA, CNRS, UMR 6617, LMPM, Chasseneuil, France
来源：
ASME PRESSURE VESSELS AND PIPING CONFERENCE 2009, VOL 3: DESIGN AND ANALYSIS | 2010年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The scope of this study is to investigate the effect of tensile prestrain on crack growth behavior in a 304L stainless steel. Fatigue crack propagation tests were performed on single-edge notched tension (SENT) raw specimens (0% of prestrain) and on prestrained specimens (2% and 10%). On one hand, it is found that the different levels of prestrain exhibit no significant influence on crack propagation in the high range of Stress Intensity Factor (SIF), where there is no detectable crack closure. On the other hand, a clear effect of prestrain on crack growth rate can be observed in the near threshold region where closure is detected. Thus, it can be concluded that the prestrain mainly affects the crack growth rate through its influence on the crack closure.
引用
收藏
页码：489 / 498
页数：10
相关论文
共 50 条
  • [1] Modeling of fatigue crack growth of stainless steel 304L
    Fan, Feifei
    Kalnaus, Sergiy
    Jiang, Yanyao
    MECHANICS OF MATERIALS, 2008, 40 (11) : 961 - 973
  • [2] An experimental investigation of fatigue crack growth of stainless steel 304L
    Kanaus, S.
    Fan, F.
    Jiang, Y.
    Vasudevan, A. K.
    INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (05) : 840 - 849
  • [3] STUDY OF THE CRACK PROPAGATION BEHAVIOUR OF 304L AUSTENITIC STAINLESS STEEL UNDER THERMAL FATIGUE.
    Bouin, Pauline
    Fissolo, Antoine
    Gourdin, Cedric
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 3: DESIGN AND ANALYSIS, 2012, : 495 - 503
  • [4] Fatigue crack growth versus plastic CTOD in the 304L stainless steel
    Antunes, F., V
    Ferreira, M. S. C.
    Branco, R.
    Prates, P.
    Cardin, C.
    Sarrazin-Baudoux, C.
    ENGINEERING FRACTURE MECHANICS, 2019, 214 : 487 - 503
  • [5] Biaxial fatigue tests and crack paths for AISI 304L stainless steel
    Chaves, V.
    Madrigal, C.
    Navarro, A.
    FRATTURA ED INTEGRITA STRUTTURALE, 2014, (30): : 273 - 281
  • [6] Effects of prestrain on high temperature impact properties of 304L stainless steel
    Woei-Shyan Lee
    Chi-Shyan Lin-Shyan
    Tao-Shyan Chen-Shyan
    Meng-Shyan Yang
    Journal of Materials Research, 2010, 25 : 754 - 763
  • [7] Effects of prestrain on high temperature impact properties of 304L stainless steel
    Lee, Woei-Shyan
    Lin, Chi-Feng
    Chen, Tao-Hsing
    Yang, Meng-Chieh
    JOURNAL OF MATERIALS RESEARCH, 2010, 25 (04) : 754 - 763
  • [8] The fatigue crack initiation at the interface between matrix and δ-ferrite in 304L stainless steel
    Rho, BS
    Hong, HU
    Nam, SW
    SCRIPTA MATERIALIA, 1998, 39 (10) : 1407 - 1412
  • [9] Analysis of Fatigue Life and Crack Growth in Austenitic Stainless Steel AISI 304l
    Chelbi, Lotfi
    Hentati, Fatma
    Znaidi, Amna
    JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2023, 17 (04): : 501 - 508
  • [10] INFLUENCE OF VARIABLE AMPLITUDE FATIGUE LOADING ON AISI 304L STAINLESS STEEL
    Gloanec, Anne-Lise
    Anis, Aqmal Syafiq
    Courtin, Stephan
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 3: DESIGN AND ANALYSIS, 2014,
12345