Examination of the influence of heat treatment on the properties of Al-Si alloys

被引：0
|
作者：
Vuksanovic, Darko
Markovic, Srdjan
Petrovic, Stanka Tomovic
Rakocevic, Snezana
Kovacevic, Kata
Tripkovic, Snezana
机构：
[1] Fac Met, Podgorica 81000, Montenegro
[2] Fac Technol & Met, Belgrade 11000, Serbia
[3] Inst Kirilo Savic, Belgrade 11000, Serbia
[4] HK Petar Draspin, Mladenovac 11400, Serbia
来源：
STEEL RESEARCH INTERNATIONAL | 2007年 / 78卷 / 08期
关键词：
alloys of Al-Si system; heat treatment; mechanical properties; inter-metallic phase; microstructure;
D O I：
10.1002/srin.200706261
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this paper the influence of heat treatment on the structural and mechanical properties of AI-Si alloys was investigated. Silicon content in the examined alloys was in the range 11 to 14%, the contents of the other alloying elements were in the standard range [1] but all alloys were modified with strontium. The regime of the applied heat treatment was quenching (520 degrees C/6h - cooling in water) + aging (205 degrees C/7h air cooling). The examinations were carried out at room temperature as well as at 250 degrees C and 300 degrees C. The obtained results showed a positive influence of the applied heat treatment on the mechanical properties of the examined alloys. The improvement of the mechanical properties can be considered as a consequence of a redistribution and change of morphology of the phases present in the structure of the alloys.
引用
收藏
页码：648 / 653
页数：6
相关论文
共 50 条
  • [31] Influence of La on microstructures of hypereutectic Al-Si alloys
    Zhang, D
    Yi, HK
    Lü, WJ
    Fan, TX
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2003, 13 (03) : 541 - 545
  • [32] Influence of heat treatment on the change of Al-Si coating properties at ultra-high strength sheets
    Kolnerova M.
    Sobotka J.
    Koreček D.
    Solfronk P.
    Manufacturing Technology, 2019, 19 (01): : 77 - 81
  • [33] Effect of heat treatment on mechanical properties of near-eutectic Al-Si cast alloys modified with Sr
    Sun, Yu
    Sun, Guo-Xiong
    2001, Chinese Mechanical Engineering Society (50):
  • [34] Microstructure and Mechanical Properties of Hypereutectic Al-Si Alloys Subjected to Magnetodynamic Treatment
    Monastyrska, Tetiana O.
    Berezina, Alla L.
    Molebnyi, Oleh A.
    Fikssen, Vladyslav M.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (01) : 144 - 149
  • [35] Microstructure and Mechanical Properties of Hypereutectic Al-Si Alloys Subjected to Magnetodynamic Treatment
    Tetiana O. Monastyrska
    Alla L. Berezina
    Oleh A. Molebnyi
    Vladyslav M. Fikssen
    Journal of Materials Engineering and Performance, 2023, 32 : 144 - 149
  • [36] Nature of anomalous change of properties of Al-Si alloys
    Chichko, AN
    Yurkevich, NP
    Sobolev, VF
    FIZIKA TVERDOGO TELA, 1995, 37 (06): : 1849 - 1853
  • [37] Effect of Li on Al-Si Alloys Structure and Properties
    Zhao Zhongkui
    Qiao Zhen
    Li Chang-long
    Sun Qing-zhou
    Zhang Pu-qing
    Wang Gui-qing
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES II, PTS 1 AND 2, 2009, 79-82 : 119 - 122
  • [38] Effect of microstructure and heat treatment of hypereutectic Al-Si alloys obtained by Rapid Solidification
    Huircapan, Marcela Pichipil
    Franco, Mercedes
    De Rosa, Horacio
    MATERIA-RIO DE JANEIRO, 2022, 27 (02):
  • [39] DISSOLUTION OF IRON INTERMETALLICS IN AL-SI ALLOYS THROUGH NONEQUILIBRIUM HEAT-TREATMENT
    NARAYANAN, LA
    SAMUEL, FH
    GRUZLESKI, JE
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (08): : 2161 - 2174
  • [40] Influence of Si content on thermal expansion characteristic of Al-Si alloys
    Kim, Yu-Mi
    Choi, Se-Weon
    Hong, Sung-Kil
    MATERIALS SCIENCE AND TECHNOLOGY, 2020, 36 (06) : 709 - 716
12345