Influence of Accelerated Aging on the Color Stability of Dental Zirconia

被引:41
作者
Maziero Volpato, Claudia Angela [1 ]
Cesar, Paulo Francisco [2 ]
Bottino, Marco Antonio [3 ]
机构
[1] Fed Univ Santa, Dept Dent, Campus Univ Reitor Joao David Lima S-N, BR-88040900 Trindade, SC, Brazil
[2] Univ Sao Paulo, Dept Biomat & Oral Biol, Ave Prof Lineu Prestes,2227 Cidade Univ, Sao Paulo, Brazil
[3] Sao Paulo State Univ, Dept Dent Mat & Prosthodont, Ave Engn Francisco Jose Longo 777, Sao Paulo, Brazil
关键词
Y-TZP CERAMICS; ACCEPTABILITY THRESHOLDS; FLEXURAL STRENGTH; TRANSLUCENCY; TRANSFORMATION; THICKNESS; RESTORATIONS; DIFFERENCE; FIRINGS; NUMBER;
D O I
10.1111/jerd.12239
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
ObjectiveThis study evaluated the influence of different aging times on the color stability of zirconia that is either veneered or not by ceramic. Materials and MethodsFifteen zirconia disks (3Y-TZP) were produced (12.0 mm in diameter and 1.0 mm-thick). Five disks (G1) did not receive veneering ceramic layer; 5 disks (G2) were veneered with 1.0 mm a ceramic layer and the other 5 disks (G3) were veneered with layer of 1.5 mm. The L*a*b* coordinates (T1) were measured with a spectrophotometer. The disks were subjected to an accelerated aging protocol for 1 hour (T2), 2 hours (T3) and 4 hours (T4). Measurements were made after each aging time. Differences in color (E00), lightness (L), chroma (C), and hue (H) were calculated by CIEDE2000 color difference formula among standard-averages, aging times and thickness tested. For E-00, one-way ANOVA was performed for the G1 and two-way ANOVA for G2 and G3. Repeated measures ANOVA was performed for L, C, and H. Multiple comparisons were performed using Tukey's test (=0.05). ResultsFor G1, statistical differences were found for lightness (L), chroma (C), and hue differences (H) (p=0.0001), highlighting the major in chroma differences (C). Discrete color differences (E-00) were observed (0.95E(00)) especially after 4 hours of aging (T4). For G2 and G3, statistical differences for L, C, and H were found as a function of the thickness of the ceramic coating (p<0.0001) and aging time (p=0.02). ConclusionsWhen 3Y-TZP was subjected to aging, discrete color differences were present. With exception of the G2, the color difference was less than 1.25E(00), demonstrating that the zirconia maintained its colorimetric properties after aging protocol. CLINICAL SIGNIFICANCEAfter prolonged aging, discrete color changes can occur in zirconia, particularly when it is contact with the oral environment, as is the case of abutments and monolithic crowns. Thus, clinical and laboratory care should be taken to maintain surface integrity of zirconia, minimizing aging. (J Esthet Restor Dent 28:304-312, 2016)
引用
收藏
页码:304 / 312
页数:9
相关论文
共 50 条
  • [21] Influence of Manufacturing Regimes on the Phase Transformation of Dental Zirconia
    Wertz, Markus
    Hoelzig, Hieronymus
    Kloess, Gert
    Hahnel, Sebastian
    Koenig, Andreas
    MATERIALS, 2021, 14 (17)
  • [22] Effect of hydrothermal aging on dental multilayered zirconia for monolithic restorations: An in vitro study
    Ha, Seung-Ryong
    Choi, Yu-Sung
    CERAMICS INTERNATIONAL, 2021, 47 (12) : 17057 - 17068
  • [23] Color Reproduction and Shade Stability of Zirconia Ceramics
    Liu, Shiming
    Jing, Li
    Deng, Xuliang
    Lin, Yuanhua
    Liu, Feng
    HIGH-PERFORMANCE CERAMICS VIII, 2014, 602-603 : 610 - 614
  • [24] Mechanical properties and translucency of a multi-layered zirconia with color gradient for dental applications
    Alves, Manuel F. R. P.
    Abreu, Lais G.
    Klippel, Gesinete G. P.
    Santos, Claudinei
    Strecker, Kurt
    CERAMICS INTERNATIONAL, 2021, 47 (01) : 301 - 309
  • [25] The effects of monomer type, filler size, and filler content of three resin cements on the color stability of laminate veneers exposed to accelerated aging
    Alghazzawi, Tariq F.
    DENTAL MATERIALS, 2024, 40 (08) : e23 - e30
  • [26] Evaluating dental zirconia
    Zhang, Yu
    Lawn, Brian R.
    DENTAL MATERIALS, 2019, 35 (01) : 15 - 23
  • [27] Construction of Nanostructured Glass-Zirconia to Improve the Interface Stability of Dental Bilayer Zirconia
    Zhou, Ming
    Zhang, Xiaoyu
    Zhang, Yaming
    Li, Ding
    Zhao, Zhe
    Wang, Qing
    Tang, Kai
    Niu, Lina
    Wang, Fu
    NANOMATERIALS, 2023, 13 (04)
  • [28] Influence of resin cement on color stability when tuting lithium disilicate and zirconia restorations A spectrophotometry study
    Sakrana, Amal Abdelsamad
    Laith, Ahmed
    Elsherbini, Ahmed
    Elerian, Fatma Abdallah
    Ozcan, Mutlu
    Al-Zordk, Walid
    INTERNATIONAL JOURNAL OF ESTHETIC DENTISTRY, 2023, 18 (02) : 114 - 126
  • [29] Additively Manufactured Zirconia for Dental Applications with In Situ Color Gradation Control
    Theis, Lukas
    Duarte, Valdemar
    Roque, Joao C.
    Santos, Telmo
    Martins, Rui F.
    3D PRINTING AND ADDITIVE MANUFACTURING, 2024, 11 (03) : e1356 - e1365
  • [30] The effect of powder A2/powder A3 mixing ratio on color and translucency parameters of dental porcelain
    Lee, Wan-Sun
    Kim, So-Yeon
    Kim, Ji-Hwan
    Kim, Woong-Chul
    Kim, Hae-Young
    JOURNAL OF ADVANCED PROSTHODONTICS, 2015, 7 (05) : 400 - 405