Stability of lamellar microstructures in a Ti-48Al-2Nb-2Cr alloy during heat treatment and its application to lamellae alignment as a quasi-seed

被引：17
|
作者：
Du, Yujun [1 ]
Shen, Jun [1 ]
Xiong, Yilong [1 ]
Shang, Zhao [1 ]
Fu, Hengzhi [1 ]
机构：
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China
来源：
INTERMETALLICS | 2015年 / 61卷
基金：
中国国家自然科学基金;
关键词：
Aluminides; Thermal stability; Crystal growth; Heat treatment; Microstructure; TIAL-BASED ALLOYS; DIRECTIONAL SOLIDIFICATION; ELECTROMAGNETIC CONFINEMENT; PHASE-TRANSFORMATIONS; SI ALLOYS;
D O I：
10.1016/j.intermet.2015.02.018
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The stability of lamellar microstructures in the Ti-48Al-2Nb-2Cr alloy during heat treatment depends more on heating rate and less on holding time and cooling rate. When the heating rate is higher than 61 degrees C/min, the original lamellae orientation at room temperature can still maintain unchanged even though the lamellae are transformed to single grains alpha temperature close to melting point. Therefore, the high-temperature alpha grains, which are transformed from the alpha(2)/gamma lamellae within a quasi-seed, are successfully employed to align the lamellar microstructure by directional solidification. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：80 / 84
页数：5
相关论文
共 50 条
  • [1] A Newly Generated Nearly Lamellar Microstructure in Cast Ti-48Al-2Nb-2Cr Alloy for High-Temperature Strengthening
    Gao, Zitong
    Yang, Jieren
    Wu, Yulun
    Hu, Rui
    Kim, Sang-Lan
    Kim, Young-Won
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50 (12): : 5839 - 5852
  • [2] Thermal stability of a fully lamellar Ti-48Al-2Cr-2Nb-1B alloy
    Hu, D
    Godfrey, AB
    Loretto, MH
    INTERMETALLICS, 1998, 6 (05) : 413 - 417
  • [3] Creep properties of Ti-48Al-2Cr-2Nb alloy having similarly oriented lamellae with fine lamellar spacing
    Xia, Zhizhou
    Liu, Ronghua
    Shen, Yingying
    Mohammed, Arroussi
    Jia, Qing
    Cui, Yuyou
    Yang, Rui
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 861
  • [4] Introducing mechanism of nano planar defect structure in Ti-48Al-2Nb-2Cr alloy through muti-step heat treatment and its effect on mechanical properties
    Hu, Qing
    Wang, Yan
    Liu, Yong
    Su, Liang
    He, Jingjun
    Luo, Yaofeng
    Gao, Hanghao
    Liu, Bin
    Lv, Liangxing
    MATERIALS CHARACTERIZATION, 2025, 222
  • [5] Brazing Ti-48Al-2Nb-2Cr Alloys with Cu-Based Amorphous Alloy Filler
    Wang, Gang
    Wu, Peng
    Wang, Wei
    Zhu, Dongdong
    Tan, Caiwang
    Su, Yongsheng
    Shi, Xinying
    Cao, Wei
    APPLIED SCIENCES-BASEL, 2018, 8 (06):
  • [6] Microstructures and mechanical behaviors of a directional lamellar Ti-48Al-2Cr-2Nb alloy produced by laser additive manufacturing
    Zhang, Xinyu
    Ye, Zhenhua
    Li, Chuanwei
    Gu, Jianfeng
    MATERIALS CHARACTERIZATION, 2024, 218
  • [7] Effect of Heat Treatment Process on Uneven Behavior of Ti-48Al-2Cr-2Nb Alloy
    Yang K.
    Xu Y.
    Dong X.
    Lu S.
    Ni H.
    Xiyou Jinshu/Chinese Journal of Rare Metals, 2020, 44 (04): : 370 - 377
  • [8] Infrared joining strength and interfacial microstructures of Ti-48Al-2Nb-2Cr intermetallics using Ti-15Cu-15Ni foil
    Lee, SJ
    Wu, SK
    INTERMETALLICS, 1999, 7 (01) : 11 - 21
  • [9] Tensile properties of Ti-48Al-2Cr-2Nb alloy having similarly oriented lamellae with fine lamellar spacing facilitated by suction casting
    Xia, Zhizhou
    Cui, Yuyou
    Shen, Yingying
    Arroussi, Mohammed
    Liu, Ronghua
    Yang, Liang
    Jia, Qing
    Yang, Rui
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 830
  • [10] Selective electron beam melting of Ti-48Al-2Nb-2Cr: Microstructure and aluminium loss
    Schwerdtfeger, Jan
    Koerner, Carolin
    INTERMETALLICS, 2014, 49 : 29 - 35
12345