Synthesis, microstructure and electrical properties of hydrothermally prepared ferroelectric BaTiO3 thin films

Thin films of polycrystalline, tetragonal BaTiO3 on oxidized Ti metal substrates were synthesized at 240 degrees C under hydrothermal conditions. Microstructure and electrical properties of the films generated over a four week period of synthesis formed the focus of this study, The films displayed a smooth and shiny surface with a relatively dense structure and no observable cracks. Film thickness reached 0.5 mu m after two weeks of synthesis and thereafter remained constant. Diameters of the grains on the film surface were in the range of 1 similar to 2 mu m. It is proposed that initial formation of the BaTiO3 film occurs by reaction of Ba2+ with solubilized titanium oxide on the Ti metal surface followed at later stages by an in-situ growth via reaction of TiO(x )with Ba2+ diffusing through the BaTiO3 film. X-ray diffraction and Raman spectroscopy indicated that the BaTiO3 films are tetragonal, and the films exhibited typical ferroelectric hysteresis loops at room temperature. However, no evidence of the dielectric anomaly (Curie transition) between 30 and 200 degrees C was observed. Dielectric constant of the films at 1 kHz at room temperature was between 400-500, Both dielectric constant and tan delta exhibited low dispersion as a function of frequency at temperatures below 150 degrees C, and the dispersion increased with temperature.