Study on characteristics and sintering behavior of W-Ni-Co tungsten heavy alloy by a secondary ball milling method

被引：29

作者：

Chen, Chun-Liang ^{[1
]}

Ma, Shih-Hsun ^{[1
]}

机构：

[1] Natl Dong Hwa Univ, Dept Mat Sci & Engn, Hualien 97401, Taiwan

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2018年 / 731卷

关键词：

Secondary ball milling; Tungsten heavy alloys; Oxide dispersion strengthened (ODS) alloys; Mechanical alloying; PHASE;

D O I：

10.1016/j.jallcom.2017.09.125

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

W-7Ni-3Co heavy tungsten alloys fabricated by mechanical alloying have been investigated. Characteristics and sintering behavior of the model alloys are strongly influenced by different milling methods. In this study, a pre-milled binder phase of gamma(Ni, Co) was synthesized by a secondary ball milling method. Therefore, the microstructure and the solubility of the tungsten grain and the g(Ni, Co) binder phase can be altered in the alloy system. The results suggest that the use of the secondary ball milling promotes the formation of solid phase during sintering. A microstructure composed of the fine and uniformly distributed g(Ni, Co) binder phase with a large amount of twinned structures was obtained, which can be related to an increase of mechanical properties. (C) 2017 Elsevier B.V. All rights reserved.

引用

页码：78 / 83

页数：6

共 20 条

[1] Production of Co-Ni alloys by mechanical-alloying [J].

Aymard, L ;

Dumont, B ;

Viau, G .

JOURNAL OF ALLOYS AND COMPOUNDS, 1996, 242 (1-2) :108-113

[2]

Bose A., 1997, P 4 INT C TUNGST REF, P17

[3]

Cai WD, 1995, REV PARTICUL MATER, V3, P71

[4] Microstructure Evolution of Tungsten-Based ODS Alloys Reinforced with the γ(Ni, Fe) Phase by a Secondary Ball Milling Method [J].

Chen, C. -L. ;

Zeng, Y. ;

Lee, J. -G. .

ACTA PHYSICA POLONICA A, 2014, 126 (04) :907-911

[5] Effects Effects of Ni/Co ratio and mechanical alloying on characteristics and sintering behavior of W-Ni-Co tungsten heavy alloys [J].

Chen, Chun-Liang ;

Ma, Shih-Hsun .

JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 711 :488-494

[6] Synthesis of ODS heavy tungsten alloys through post-annealing and secondary ball milling [J].

Chen, Chun-Liang ;

Huang, Chun-Lin ;

Zeng, Yong .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 :359-364

[7] Milling media and alloying effects on synthesis and characteristics of mechanically alloyed ODS heavy tungsten alloys [J].

Chen, Chun-Liang ;

Huang, Chun-Lin .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 44 :19-26

[8] Mechanical alloying of ODS tungsten heavy alloys and microstructure development of intermetallic compounds [J].

Chen, Chun-Liang ;

Huang, Chun-Lin .

METALS AND MATERIALS INTERNATIONAL, 2013, 19 (05) :1047-1051

[9] The effects of alloying and milling on the formation of intermetallics in ODS tungsten heavy alloys [J].

Chen, Chun-Liang ;

Huang, Chun-Lin .

INTERMETALLICS, 2013, 41 :10-15

[10]

Elshimy H., 2014, Adv. Mater. Phys. Chem, V4, P237, DOI [10.4236/ampc.2014.412027, DOI 10.4236/AMPC.2014.412027]

← 1 2 →