Fretting damage in thin sheets: Analysis of an experimental configuration

被引：9

作者：

Hirsch, M. R. ^{[1
]}

Neu, R. W. ^{[1
]}

机构：

[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA

来源：

TRIBOLOGY INTERNATIONAL | 2011年 / 44卷 / 11期

关键词：

Fretting; Fatigue; Finite element method; Austenitic stainless steel; MULTIAXIAL FATIGUE; CRITICAL-PLANE; CONTACT; WEAR; TI-6AL-4V; BEHAVIOR; PREDICTIONS; FRICTION; ALLOY; STRIP;

D O I：

10.1016/j.triboint.2010.11.003

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A method for evaluating fretting damage in thin sheets was developed for AISI 301 stainless steel in full hard condition in contact with AISI 52100 steel and cast ANSI A356 aluminum. Samples were subjected to fretting and then were subsequently fatigue tested to determine the impact of the fretting damage on fatigue life. A finite element model of the experimental configuration was used to determine the response for the experimental conditions imposed. The values of Fatemi-Socie critical-plane fatigue damage parameter are shown to correspond to the trends in the observed residual fatigue life for contact with AISI 52100 steel. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：1503 / 1510

页数：8

共 30 条

[1]

Ahmad J, 2003, P 9 NAT TURB ENG HIG

[2] Modeling of geometry effects in fretting fatigue [J].

Bartha, B. B. ;

Nicholas, T. ;

Farris, T. N. .

TRIBOLOGY INTERNATIONAL, 2006, 39 (10) :1131-1141

[3] AN ELASTIC STRIP IN PLANE ROLLING CONTACT [J].

BENTALL, RH ;

JOHNSON, KL .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1968, 10 (08) :637-&

[4] An evaluation of multiaxial fatigue life assessment methods for engineering components [J].

Das, J ;

Sivakumar, SM .

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1999, 76 (10) :741-746

[5] Fretting fatigue predictions in a complex coupling [J].

Ding, J. ;

Sum, W. S. ;

Sabesan, R. ;

Leen, S. B. ;

McColl, I. R. ;

Williams, E. J. .

INTERNATIONAL JOURNAL OF FATIGUE, 2007, 29 (07) :1229-1244

[6] The effect of slip regime on fretting wear-induced stress evolution [J].

Ding, J ;

Leen, SB ;

McColl, IR .

INTERNATIONAL JOURNAL OF FATIGUE, 2004, 26 (05) :521-531

[7]

DOBROMIRSKI JM, 1992, AM SOC TEST MATER, V1159, P60, DOI 10.1520/STP25816S

[8] MULTIAXIAL FATIGUE LIFE PREDICTIONS UNDER THE INFLUENCE OF MEAN-STRESSES [J].

FATEMI, A ;

KURATH, P .

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1988, 110 (04) :380-388

[9] A CRITICAL PLANE APPROACH TO MULTIAXIAL FATIGUE DAMAGE INCLUDING OUT-OF-PHASE LOADING [J].

FATEMI, A ;

SOCIE, DF .

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1988, 11 (03) :149-165

[10] CONTACT STRESSES IN A MODERATELY THIN STRIP (WITH PARTICULAR REFERENCE TO FRETTING EXPERIMENTS) [J].

FELLOWS, LJ ;

NOWELL, D ;

HILLS, DA .

WEAR, 1995, 185 (1-2) :235-238

← 1 2 3 →