Effect of sterilization method on properties of Palacos® R acrylic bone cement

被引:52
作者
Lewis, G
Mladsi, S
机构
[1] Univ Memphis, Dept Mech Engn, Memphis, TN 38152 USA
[2] Smith & Nephew Inc, Memphis, TN 38116 USA
关键词
bone cement; sterilization method; quasi-static properties; fatigue;
D O I
10.1016/S0142-9612(97)00165-8
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
The focus of this work was a delineation of the effect of the method of sterilization (gamma-irradiation versus exposure to ethylene oxide (EtO) gas) of the powder constituents of Palaces R bone cement on the molecular weight, quasi-static tensile and compressive properties and fatigue performance of the fully polymerized material. It was found that the quasi-static properties are not noticeably affected. However, when the powder constituents were gamma-sterilized, both the molecular weight and the fatigue performance of the cement are significantly lower compared to when the constituents are EtO-sterilized. Explanations are offered for these findings, and recommendations are submitted regarding the preferred method of sterilization of bone cement and reporting of studies in which different formulations of cement are compared. (C) 1998 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:117 / 124
页数:8
相关论文
共 50 条
  • [31] Laser ablation of dyed acrylic bone cement
    Lee, CL
    Roberts, C
    Litsky, AS
    LASERS IN SURGERY AND MEDICINE, 1997, 20 (03) : 280 - 289
  • [32] Microtomography assessment of failure in acrylic bone cement
    Sinnett-Jones, PE
    Browne, M
    Ludwig, W
    Buffière, JY
    Sinclair, I
    BIOMATERIALS, 2005, 26 (33) : 6460 - 6466
  • [33] Effect of vacuum-treatment on deformation properties of PMMA bone cement
    Zivic, Fatima
    Babic, Miroslav
    Grujovic, Nenad
    Mitrovic, Slobodan
    Favaro, Gregory
    Caunii, Mihaela
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2012, 5 (01) : 129 - 138
  • [34] Effect of cement modulus on the shear properties of the bone-cement interface
    Funk, MJ
    Litsky, AS
    BIOMATERIALS, 1998, 19 (17) : 1561 - 1567
  • [35] Effect of Incorporation of Lanthanum and Cerium-doped Hydroxyapatite on Acrylic Bone Cement Produced from Phosphogypsum Waste
    Hamdy, Tamer M.
    Mousa, Sahar M. A.
    Sherief, Marwa A.
    EGYPTIAN JOURNAL OF CHEMISTRY, 2020, 63 (05): : 1823 - 1832
  • [36] EFFECT OF METHYLENE-BLUE ON THE FRACTURE-TOUGHNESS OF ACRYLIC BONE-CEMENT
    LEWIS, G
    BIOMATERIALS, 1994, 15 (12) : 1024 - 1028
  • [37] On the magnitude and variability of the fatigue strength of acrylic bone cement
    Murphy, BP
    Prendergast, PJ
    INTERNATIONAL JOURNAL OF FATIGUE, 2000, 22 (10) : 855 - 864
  • [38] Enhancement of Antibiotic Elution From Acrylic Bone Cement
    Anagnostakos, Konstantinos
    Kelm, Jens
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2009, 90B (01) : 467 - 475
  • [39] The relationship between stress, porosity, and nonlinear damage accumulation in acrylic bone cement
    Murphy, BP
    Prendergast, PJ
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 2002, 59 (04): : 646 - 654
  • [40] Radiopacity of tantalum-loaded acrylic bone cement
    Persson, C.
    Guandalini, L.
    Baruffaldi, F.
    Pierotti, L.
    Baleani, M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2006, 220 (H7) : 787 - 791