Effect of sterilization method on properties of Palacos® R acrylic bone cement

被引:52
作者
Lewis, G
Mladsi, S
机构
[1] Univ Memphis, Dept Mech Engn, Memphis, TN 38152 USA
[2] Smith & Nephew Inc, Memphis, TN 38116 USA
关键词
bone cement; sterilization method; quasi-static properties; fatigue;
D O I
10.1016/S0142-9612(97)00165-8
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
The focus of this work was a delineation of the effect of the method of sterilization (gamma-irradiation versus exposure to ethylene oxide (EtO) gas) of the powder constituents of Palaces R bone cement on the molecular weight, quasi-static tensile and compressive properties and fatigue performance of the fully polymerized material. It was found that the quasi-static properties are not noticeably affected. However, when the powder constituents were gamma-sterilized, both the molecular weight and the fatigue performance of the cement are significantly lower compared to when the constituents are EtO-sterilized. Explanations are offered for these findings, and recommendations are submitted regarding the preferred method of sterilization of bone cement and reporting of studies in which different formulations of cement are compared. (C) 1998 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:117 / 124
页数:8
相关论文
共 50 条
  • [21] Improved mechanical properties of acrylic bone cement with short titanium fiber reinforcement
    S. P. Kotha
    C. Li
    P. McGinn
    S. R. Schmid
    J. J. Mason
    Journal of Materials Science: Materials in Medicine, 2006, 17 : 1403 - 1409
  • [22] Mechanical, material, and antimicrobial properties of acrylic bone cement impregnated with silver nanoparticles
    Slane, Josh
    Vivanco, Juan
    Rose, Warren
    Ploeg, Heidi-Lynn
    Squire, Matthew
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2015, 48 : 188 - 196
  • [23] A novel high-viscosity, two-solution acrylic bone cement: Effect of chemical composition on properties
    Hasenwinkel, JM
    Lautenschlager, EP
    Wixson, RL
    Gilbert, JL
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1999, 47 (01): : 36 - 45
  • [24] Improved mechanical properties of acrylic bone cement with short titanium fiber reinforcement
    S. P. Kotha
    C. Li
    P. McGinn
    S. R. Schmid
    J. J. Mason
    Journal of Materials Science: Materials in Medicine, 2006, 17 : 743 - 748
  • [25] Effects of the initial temperature of acrylic bone cement liquid monomer on the properties of the stem-cement interface and cement polymerization
    Iesaka, K
    Jaffe, WL
    Kummer, FJ
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2004, 68B (02) : 186 - 190
  • [26] New radiopaque acrylic bone cement. II. Acrylic bone cement with bromine-containing monomer
    M. C. Rusu
    I. C. Ichim
    M. Popa
    M. Rusu
    Journal of Materials Science: Materials in Medicine, 2008, 19 : 2609 - 2617
  • [27] Influence of the radiopacifier in an acrylic bone cement on its mechanical, thermal, and physical properties: Barium sulfate-containing cement versus iodine-containing cement
    Lewis, G
    van Hooy-Corstjens, CSJ
    Bhattaram, A
    Koole, LH
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2005, 73B (01) : 77 - 87
  • [28] In-vitro-Freisetzung von Antibiotika aus SmartSet HV- und Palacos R-Knochenzement und deren Einfluss auf die mechanischen EigenschaftenIn vitro elution and mechanical properties of antibiotic-loaded SmartSet HV and Palacos R acrylic bone cements
    P. M. S. Simpson
    G. F. Dall
    S. J. Breusch
    C. Heisel
    Der Orthopäde, 2005, 34 (12): : 1255 - 1262
  • [29] Effect of choice of surgical gloves on dough time measurements of acrylic bone cement
    He, SL
    Scott, C
    De Luise, M
    Edwards, B
    Higham, P
    BIOMATERIALS, 2003, 24 (02) : 235 - 237
  • [30] The effect of moisture absorption on the fatigue crack propagation resistance of acrylic bone cement
    Schmitt, S
    Krzypow, DJ
    Rimnac, CM
    BIOMEDIZINISCHE TECHNIK, 2004, 49 (03): : 61 - 65