Effect of sterilization method on properties of Palacos® R acrylic bone cement

被引:52
作者
Lewis, G
Mladsi, S
机构
[1] Univ Memphis, Dept Mech Engn, Memphis, TN 38152 USA
[2] Smith & Nephew Inc, Memphis, TN 38116 USA
关键词
bone cement; sterilization method; quasi-static properties; fatigue;
D O I
10.1016/S0142-9612(97)00165-8
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
The focus of this work was a delineation of the effect of the method of sterilization (gamma-irradiation versus exposure to ethylene oxide (EtO) gas) of the powder constituents of Palaces R bone cement on the molecular weight, quasi-static tensile and compressive properties and fatigue performance of the fully polymerized material. It was found that the quasi-static properties are not noticeably affected. However, when the powder constituents were gamma-sterilized, both the molecular weight and the fatigue performance of the cement are significantly lower compared to when the constituents are EtO-sterilized. Explanations are offered for these findings, and recommendations are submitted regarding the preferred method of sterilization of bone cement and reporting of studies in which different formulations of cement are compared. (C) 1998 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:117 / 124
页数:8
相关论文
共 50 条
  • [1] Free volume and mechanical properties of Palacos® R bone cement
    J. Algers
    F. H. J. Maurer
    M. Eldrup
    J.-S. Wang
    Journal of Materials Science: Materials in Medicine, 2003, 14 : 955 - 960
  • [2] Apparent fracture toughness of acrylic bone cement: effect of test specimen configuration and sterilization method
    Lewis, G
    BIOMATERIALS, 1999, 20 (01) : 69 - 78
  • [3] Fracture and fatigue properties of acrylic bone cement - The effects of mixing method, sterilization treatment, and molecular weight
    Graham, J
    Pruitt, L
    Ries, M
    Gundiah, N
    JOURNAL OF ARTHROPLASTY, 2000, 15 (08) : 1028 - 1035
  • [4] Effect of Direct Sterilization on Mechanical Properties of Bone Cement Implants
    Rysova, M.
    Capek, L.
    Martinova, L.
    INTERNATIONAL CONFERENCE OF THE CZECH SOCIETY OF BIOMECHANICS - HUMAN BIOMECHANICS 2010, 2010, : 296 - 300
  • [5] Mixing of acrylic bone cement: effect of oxygen on setting properties
    He, SL
    Scott, C
    Higham, P
    BIOMATERIALS, 2003, 24 (27) : 5045 - 5048
  • [6] Fracture properties of an acrylic bone cement
    Bialoblocka-Juszczyk, E.
    Baleani, M.
    Cristofolini, L.
    Viceconti, M.
    ACTA OF BIOENGINEERING AND BIOMECHANICS, 2008, 10 (01) : 21 - 26
  • [7] The effect of ethanol on acrylic bone cement
    Bettencourt, A
    Calado, A
    Amaral, J
    Vale, FM
    Rico, JMT
    Monteiro, J
    Montemor, MF
    Ferreira, MGS
    Castro, M
    INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2002, 241 (01) : 97 - 102
  • [8] Effect of mixing method and storage temperature of cement constituents on the fatigue and porosity of acrylic bone cement
    Lewis, G
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1999, 48 (02): : 143 - 149
  • [9] The effect of the monomer-to-powder ratio on the material properties of acrylic bone cement
    Belkoff, SM
    Sanders, JC
    Jasper, LE
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 2002, 63 (04): : 396 - 399
  • [10] Effect of two variables on the fatigue performance of acrylic bone cement: mixing method and viscosity
    Lewis, G
    BIO-MEDICAL MATERIALS AND ENGINEERING, 1999, 9 (04) : 197 - 207