Pressure, Feed Rate, and Abrasive Mass Flow Rate Influence on Surface Roughness for Recombinant Bamboo Abrasive Water Jet Cutting

被引：6

作者：

Li, Rongrong ^{[1
]}

Ekevad, Mats ^{[2
]}

Guo, Xiaolei ^{[1
]}

Cao, Pingxiang ^{[1
]}

Wang, Jie ^{[1
]}

Chen, Qingqing ^{[1
]}

Xue, Hong ^{[1
]}

机构：

[1] Nanjing Forestry Univ, Fac Mat Sci & Engn, Nanjing 210037, Jiangsu, Peoples R China

[2] Lulea Univ Technol, Div Wood Sci & Engn, S-93187 Skelleftea, Sweden

来源：

BIORESOURCES | 2015年 / 10卷 / 02期

关键词：

Recombinant bamboo; Response surface methodology; Abrasive water jet; Surface roughness; CHOSEN PARAMETERS;

D O I：

10.15376/biores.10.2.1998-2008

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

The effects of pressure, feed rate, and abrasive mass flow rate on surface roughness were investigated during abrasive water cutting of recombinant bamboo. Two different thicknesses (10 mm and 15 mm) of recombinant bamboo were cut in the longitudinal and transversal directions by abrasive water jet. All experiments were arranged using response surface methodology. The parameter R-a was selected to represent the surface roughness. The value of Ra increased with an increase in feed rate and abrasive mass flow rate, but decreased with an increase in pressure. The surface roughness was lower when cutting the fiber longitudinally than when cutting transversally.

引用

页码：1998 / 2008

页数：11

共 50 条

[21] Control of striated roughness on the surface cut by abrasive water jet
Niu, M
Fukunishi, Y
Sawamura, T
Kobayashi, R
13TH INTERNATIONAL CONFERENCE ON JETTING TECHNOLOGY, 1996, (21): : 769 - 777
[22] INFLUENCE OF WATER PRESSURE ON SURFACE ROUGHNESS PARAMETERS IN ABRASIVE WATERJET CUTTING ON AM60 MAGNESIUM ALLOY
Spadlo, S.
Krajcarz, D.
ENGINEERING MECHANICS 2018 PROCEEDINGS, VOL 24, 2018, : 805 - 808
[23] The effect of cutting jet variation on surface striation formation in abrasive water jet cutting
Chen, FL
Siores, E
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 135 (01) : 1 - 5
[24] Flow structure and cutting capability of abrasive water injection jet
Shimizu, Seiji
Kumagai, Shinji
Ochi, Akio
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 2004, 70 (691): : 629 - 635
[25] Influence of Processing Parameters on the Surface Roughness of Solid Wood Cut by Abrasive Water Jet
Pelit, Huseyin
Yaman, Ozkan
BIORESOURCES, 2020, 15 (03): : 6135 - 6148
[26] Prediction of crater depth, surface roughness and erosion rate during abrasive jet machining of glass
Melentiev, Ruslan
Fang, Fengzhou
WEAR, 2021, 468
[27] Numerical simulation of surface roughness and erosion rate of abrasive jet micro-machined channels
Jafar, R. Haj Mohammad
Spelt, J. K.
Papini, M.
WEAR, 2013, 303 (1-2) : 302 - 312
[28] Experimental analysis of striated roughness on the surface of metallic materials in abrasive jet cutting
Kobayashi, Ryoji
Fukunishi, Yu
Tsuda, Masaaki
Abe, Akira
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1996, 62 (595): : 946 - 951
[29] Effect of abrasive water jet turning process parameters on surface roughness and material removal rate of AISI 1050 steel
Kartal, Fuat
Gokkaya, Hasan
MATERIALS TESTING, 2015, 57 (09) : 773 - 782
[30] Cutting of aluminium alloy with abrasive water jet and cryogenic assisted abrasive water jet: A comparative study of the surface integrity approach
Yuvaraj, N.
Kumar, M. Pradeep
WEAR, 2016, 362 : 18 - 32

← 1 2 3 4 5 →