Mechanical properties of hot-pressed Al2O3/SiC composites

被引：62

作者：

Shi, X. L. ^{[1
]}

Xu, F. M. ^{[1
]}

Zhang, Z. J. ^{[1
]}

Dong, Y. L. ^{[1
]}

Tan, Y. ^{[1
]}

Wang, L. ^{[1
]}

Yang, J. M. ^{[2
]}

机构：

[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China

[2] Univ Calif Los Angeles, Dept Mat Sci & Engn, Los Angeles, CA 90095 USA

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2010年 / 527卷 / 18-19期

关键词：

Al2O3/SiC composites; Flexural strength; Fracture toughness; MICROSTRUCTURE; RESISTANCE; BEHAVIOR;

D O I：

10.1016/j.msea.2010.03.035

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Al2O3/SiC composites were prepared by hot pressing with micrometer Al2O3 powders and SiC powders as raw materials. The mechanical properties, including flexural strength, hardness, and fracture toughness were studied. The experimental results showed that flexural strength was enhanced with the density increasing and grain refining. 615 MPa, the highest flexural strength was obtained in 20 wt.%SiC composite sintered at 1735 degrees C. The fracture toughness increased at first then decreased with SiC content variation. 7.6 MPa m(1/2) of the highest fracture toughness was obtained in the composite containing 5 wt.%SiC sintered at 1635 degrees C. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：4646 / 4649

页数：4

共 20 条

[1] [Anonymous], J AM CERAM SOC
[2] ROLE OF INTERFACIAL GRAIN-BRIDGING SLIDING FRICTION IN THE CRACK-RESISTANCE AND STRENGTH PROPERTIES OF NONTRANSFORMING CERAMICS
BENNISON, SJ
LAWN, BR
[J]. ACTA METALLURGICA, 1989, 37 (10): : 2659 - 2671
[3] Pinning effect of SiC particles on mechanical properties of Al2O3-SiC ceramic matrix composites
Deng, ZY
Shi, JL
Zhang, YF
Jiang, DY
Guo, JK
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (05) : 501 - 508
[4] MICROFRACTURE FROM THERMAL-EXPANSION ANISOTROPY .1. SINGLE-PHASE SYSTEMS
EVANS, AG
[J]. ACTA METALLURGICA, 1978, 26 (12): : 1845 - 1853
[5] SiC-ZrO2(3Y)-Al2O3 nanocomposites superfast densified by spark plasma sintering
Gao, L
Wang, HZ
Hong, JS
Miyamoto, H
Miyamoto, K
Nishikawa, Y
Torre, SDDL
[J]. NANOSTRUCTURED MATERIALS, 1999, 11 (01): : 43 - 49
[6] Griffith A.A., 1921, Masinovedenie. C, V221, P163, DOI DOI 10.1098/RSTA.1921.0006
[7] EFFECT OF 2ND-PHASE ON MECHANICAL-PROPERTIES AND TOUGHENING OF AL2O3 BASED CERAMIC COMPOSITES
JANG, BK
ENOKI, M
KISHI, T
OH, HK
[J]. COMPOSITES ENGINEERING, 1995, 5 (10-11): : 1275 - 1286
[8] Microstructure and mechanical properties of pressureless sintered Al2O3/SiC nanocomposites
Jeong, YK
Niihara, K
[J]. NANOSTRUCTURED MATERIALS, 1997, 9 (1-8): : 193 - 196
[9] Processing and mechanical properties of Al2O3-5 vol.% Cr nanocomposites
Ji, Y
Yeomans, JA
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (12) : 1927 - 1936
[10] Microstructure and mechanical properties of Al2O3-TiC-4vol.%Co composites prepared from cobalt coated powders
Li, J
Yin, YS
Shi, RX
Ma, LP
Li, J
[J]. SURFACE & COATINGS TECHNOLOGY, 2006, 200 (12-13) : 3705 - 3712

← 1 2 →