EXPERIMENTAL VALIDATION OF NUMERICAL MODEL OF COMPOSITE PANEL FOR AEROSPACE STRUCTURAL APPLICATIONS

被引：0
作者：
Mucha, W. [1 ]
Kus, W. [1 ]
Viana, J. C. [2 ]
Nunes, J. P. [2 ]
机构：
[1] Silesian Tech Univ, Dept Computat Mech & Engn, Ul Konarskiego 18A, PL-44100 Gliwice, Poland
[2] Univ Minho, IPC Inst Polymers & Composites, Dept Polymer Engn, Campus Azurem, P-4800058 Guimaraes, Portugal
来源：
ENGINEERING MECHANICS 2020 (IM2020) | 2020年
关键词：
Hat-stiffened panel; Finite element method; Laminate; Bending stiffness;
D O I：
10.21495/5896-3-358
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Composite panels are widely used in aerospace structural applications (e.g., fuselage, wings). A typical hat-stiffened panel was manufactured using the vacuum infusion process. The applied material is carbon/epoxy 10-layer laminate. The global properties of the laminate were computed from the mechanical properties of a single ply. Finite element model of the panel was created and validated experimentally by measuring bending stiffness of the panel in different points.
引用
收藏
页码：358 / 361
页数：4
相关论文
共 50 条
  • [31] Numerical Modeling and Experimental Validation of Free Surface Flow Problems
    Cruchaga, Marcela
    Battaglia, Laura
    Storti, Mario
    D'Elia, Jorge
    ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING, 2016, 23 (01) : 139 - 169
  • [32] Numerical determination and experimental validation of the fracture toughness of welded joints
    Hemer, Abubkr
    Milovic, Ljubica
    Grbovic, Aleksandar
    Aleksic, Bojana
    Aleksic, Vujadin
    ENGINEERING FAILURE ANALYSIS, 2020, 107
  • [33] Sonothermography in composite materials: Finite Element modeling and experimental validation
    Hosten, Bernard
    Biateau, Christine
    Bacon, Christophe
    Pradere, Christophe
    Batsale, Jean-Christophe
    Meziane, Anissa
    NDT & E INTERNATIONAL, 2012, 51 : 120 - 126
  • [34] NUMERICAL AND EXPERIMENTAL VALIDATION OF HOMOGENIZATION TECHNIQUES FOR BUBBLE DECK SLABS
    Garbowski, Tomasz
    Staszak, Natalia
    Kostrzewski, Wojciech
    Szymczak-graczyk, Anna
    CIVIL AND ENVIRONMENTAL ENGINEERING REPORTS, 2025, 35 (01) : 230 - 249
  • [35] Numerical simulation of the stress peen forming process and experimental validation
    Miao, H. Y.
    Larose, S.
    Perron, C.
    Levesque, Martin
    ADVANCES IN ENGINEERING SOFTWARE, 2011, 42 (11) : 963 - 975
  • [36] Efficient structural computations with parameters uncertainty for composite applications
    Carrere, N.
    Rollet, Y.
    Leroy, F. -H.
    Maire, J. -F.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (09) : 1328 - 1333
  • [37] Experimental and numerical investigation of a thermal conductivity in the thermally drained carbon-fiber/epoxy composite materials for aeronautical applications
    Arbaoui, Jamal
    Aucher, Jeremie
    Gomina, Moussa
    Breard, Joel
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2022, 41 (19-20) : 791 - 804
  • [38] An efficient multi-scale model for needle-punched Cf/SiCm composite materials with experimental validation
    Lim, Hyoung Jun
    Choi, Hoil
    Lee, Min Jung
    Yun, Gun Jin
    COMPOSITES PART B-ENGINEERING, 2021, 217
  • [39] A continuum mechanical model for asphalt based on the particle size distribution: Numerical formulation for large deformations and experimental validation
    Behnke, R.
    Falla, G. Canon
    Leischner, S.
    Haendel, T.
    Wellner, F.
    Kaliske, M.
    MECHANICS OF MATERIALS, 2021, 153
  • [40] Reliability Analysis of a Composite Wind Turbine Blade Section Using the Model Correction Factor Method: Numerical Study and Validation
    Nikolay Dimitrov
    Peter Friis-Hansen
    Christian Berggreen
    Applied Composite Materials, 2013, 20 : 17 - 39
12345