Steel-concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions

被引:99
作者
Campione, G [1 ]
Cucchiara, C [1 ]
La Mendola, L [1 ]
Papia, A [1 ]
机构
[1] Univ Palermo, Dipartimento Ingn Strutturale & Geotecn, I-90128 Palermo, Italy
关键词
lightweight concrete; bond strength; confinement; steel fibers; monotonic loads; cyclic loads;
D O I
10.1016/j.engstruct.2005.01.010
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Experimental results of the local bond stress-slip relationship of reinforcing bars embedded in lightweight fiber reinforced concrete with expanded clay aggregates are presented. The effect of the following parameters were investigated: - dimension of specimens; - anchorage length; - percentages of hooked steel fibers; - geometrical ratio of transverse reinforcement; - confinement external transverse pressure. Prismatic specimens with deformed steel bars embedded for a fixed length equal to five and eight equivalent diameters were tested under both monotonic and cyclic reversal imposed displacements at the tip of the bars, in controlled displacement tests. The influence of the above mentioned parameters was investigated, and the effects in terms of strength and ductility of the confinement due to transverse steel, to the fibers or to the pressure applied externally are shown. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:881 / 890
页数:10
相关论文
共 15 条
  • [1] [Anonymous], 1988, ACI STRUCT J, V85, P563
  • [2] Balaguru P, 1996, ACI STRUCT J, V93, P62
  • [3] Cairns J., 2004, P 6 INT RILEM S FIBR, P321
  • [4] Campione G, 1999, ACI MATER J, V96, P27
  • [5] Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates
    Campione, G
    Miraglia, N
    Papia, M
    [J]. MATERIALS AND STRUCTURES, 2001, 34 (238) : 201 - 210
  • [6] CAMPIONE G, 2004, P 13 WCEE
  • [7] Experimental investigation on steel-concrete bond in lightweight and normal weight concrete
    Chen, HJ
    Huang, CH
    Kao, ZY
    [J]. STRUCTURAL ENGINEERING AND MECHANICS, 2004, 17 (02) : 141 - 152
  • [8] CIAMPI V, 1981, IABSE C ADV MECH REI, P53
  • [9] ELIGEHAUSEN R, 1986, NOUCBERC8323, P1
  • [10] HARAJLI M, 2004, P 6 RILEM S FIBR REI, P1207