The effect of laser shock peening, shot peening and their combination on the microstructure and fatigue properties of Ti-6Al-4V titanium alloy

被引：94
|
作者：
Luo, Xuekun [1 ]
Dang, Ning [2 ]
Wang, Xin [1 ]
机构：
[1] AECC Beijing Inst Aeronaut Mat, Beijing 100095, Peoples R China
[2] Northwestern Polytech Univ, Sch Aeronaut, Xian 710072, Peoples R China
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2021年 / 153卷
关键词：
Surface treatments; Shot peening; Microstructures; Residual stresses; Fractography; FOREIGN-OBJECT DAMAGE; CRACK-GROWTH; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; INITIATION; STRENGTH; BEHAVIOR;
D O I：
10.1016/j.ijfatigue.2021.106465
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this work, the effect of a novel post process integrating laser shock peening (LSP) with shot peening (SP) on the fatigue property of Ti-6Al-4V titanium alloy is investigated. The fatigue life can be improved (up to 9.3 times) by this post-process. The compressive residual stress (CRS) distribution and dislocation-gradient microstructure obtained were found to be responsible for the improvement. The fatigue crack initiation was hindered by the high-density dislocation layer with high CRS value on the surface and maximum CRS in the sub-surface, while the crack propagation was retarded by the dislocation proliferation layer with large CRS gradient.
引用
收藏
页数：11
相关论文
共 50 条
  • [21] Effect of ultrasonic shot peening on the microstructure, surface residual stress, and wear properties of Ti-6Al-4V alloy
    Sun, Haodong
    Si, Chaorun
    Wang, Junbiao
    SURFACE ENGINEERING, 2024, 40 (11-12) : 1098 - 1112
  • [22] Microstructure and high-temperature tribological properties of Ti-6Al-4V alloy treated by laser shock peening
    Zhang, Li
    Ouyang, Wentai
    Qin, Xiu
    Zhang, Shuowen
    Xie, Weixin
    Jiang, Shilong
    Zhang, Wenwu
    Sheng, Liyuan
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 : 4129 - 4145
  • [23] Fatigue strength improvement in Ti-6Al-4V subjected to foreign object damage by combined treatment of laser shock peening and shot peening
    Wang, Lingfeng
    Zhou, Liucheng
    Liu, Lulu
    He, Weifeng
    Pan, Xinlei
    Nie, Xiangfan
    Luo, Sihai
    INTERNATIONAL JOURNAL OF FATIGUE, 2022, 155
  • [24] Effect of ultrasonic shot peening on LCF behavior of the Ti-6Al-4V alloy
    Kumar, Sanjeev
    Chattopadhyay, K.
    Singh, Vakil
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 724 : 187 - 197
  • [25] Effect of TiN/Ti coating combined with laser shock peening pre-treatment on the fatigue strength of Ti-6Al-4V titanium alloy
    Cao, Xin
    He, Weifeng
    Liao, Bin
    He, Guangyu
    Jiao, Yang
    Huang, Da
    Wang, Shiguang
    SURFACE & COATINGS TECHNOLOGY, 2020, 403
  • [26] Surface Layer Properties and Fatigue Behavior in Ti-6Al-4V: Comparing Results after Laser Shock Peening, Shot Peening and Ball-Burnishing
    Mhaede, Mansour
    Sano, Yuji
    Altenberger, Igor
    Wagner, Lothar
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL II, 2012, : 1338 - 1341
  • [27] SHOT PEENING EFFECT ON LOW CYCLE FATIGUE PROPERTIES OF TI-6AL-4V AND INCONEL 718
    Nakamura, Hiroshi
    Takanashi, Masahiro
    Itabashi, Yu
    Kuroki, Hiroshi
    Ueda, Yusuke
    PROCEEDINGS OF THE ASME TURBO EXPO 2011, VOL 4, 2012, : 791 - 797
  • [28] Effect of ultrasonic shot peening on microstructure evolution and corrosion resistance of selective laser melted Ti-6Al-4V alloy
    Zhang, Qi
    Duan, Bingbing
    Zhang, Ziqian
    Wang, Junbiao
    Si, Chaorun
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 11 : 1090 - 1099
  • [29] The effect of shot peening time on mechanical properties and residual stress in Ti-6Al-4V alloy
    Moradi, Ali
    Heidari, Ali
    Amini, Kamran
    Aghadavoudi, Farshid
    Abedinzadeh, Reza
    METALLURGICAL RESEARCH & TECHNOLOGY, 2022, 119 (04)
  • [30] Effect of shot peening on the fretting wear of Ti-6Al-4V
    Fridrici, V
    Fouvry, S
    Kapsa, P
    WEAR, 2001, 250 : 642 - 649
12345