Densification and characterization of hot-pressed ZrC-based composite doped with Nb and CNT

被引：12

作者：

Li, Jian ^{[1
]}

Zhang, Zhaofu ^{[1
]}

Wang, Shouhao ^{[1
]}

Wang, Yongchang ^{[1
]}

Dai, Jixiang ^{[1
]}

Zu, Yufei ^{[1
]}

Sha, Jianjun ^{[1
]}

机构：

[1] Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China

来源：

MATERIALS & DESIGN | 2016年 / 104卷

基金：

高等学校博士学科点专项科研基金;

关键词：

ZrC; Nb; CNT; Microstructure; Mechanical properties; MECHANICAL-PROPERTIES; ENVIRONMENT; STRENGTH; BEHAVIOR; KINETICS; POWDERS;

D O I：

10.1016/j.matdes.2016.05.003

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

ZrC-based composite doped with 20 vol.% niobium (Nb) and 3 vol.% carbon nanotubes (CNT) was prepared by hot pressing. Due to the addition of Nb and CNT, the sinterability of ZrC was significantly improved, resulting in highly dense matrix (99.28%) at reduced sintering temperature (1600 degrees C). The flexural strength was 590 MPa at room temperature and 563 MPa at 800 degrees C, respectively. The fracture toughness was 7.23 MPa.m(1/2), which increased by 80% compared with the monolithic ZrC (4 MPa.m(1/2)). In addition, the work of fracture was calculated to be 267 J/m(2). Based on the microstructure characterizations, the improved fracture properties could be attributed to crack deflection, crack bridging and crack branching, which consumed more fracture energy during the fracture process. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：43 / 50

页数：8

共 50 条

[21] MECHANISMS OF DENSIFICATION OF SILICON-NITRIDE HOT-PRESSED WITH MAGNESIA ADDITIONS
BABINI, GN
BELLOSI, A
VINCENZINI, P
ANNALI DI CHIMICA, 1980, 70 (9-10) : 507 - 530
[22] DENSIFICATION KINETICS OF SILICON-NITRIDE HOT-PRESSED WITH CERIA ADDITIONS
BABINI, GN
BELLOSI, A
VINCENZINI, P
MATERIALS CHEMISTRY, 1980, 5 (4-5): : 267 - 288
[23] Densification Behavior and Microstructure Evolution of Hot-Pressed HfB2
Brown-Shaklee, Harlan J.
Fahrenholtz, William G.
Hilmas, Greg E.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, 94 (01) : 156 - 165
[24] Microstructure and mechanical properties of hot-pressed ZrC-Ti-CNTs composites
Sha, Jianjun
Li, Jian
Wang, Shouhao
Zhang, Zhaofu
Wang, Yongchang
Dai, Jixiang
MATERIALS & DESIGN, 2016, 107 : 520 - 528
[25] Hot-pressed ALON-based composite ceramics and their mechanical properties
Shimpo, A
Ueki, M
Naka, M
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2002, 110 (07) : 662 - 668
[26] Characterization of hot-pressed graphene reinforced ZrB2-SiC composite
Asl, Mehdi Shahedi
Kakroudi, Mandi Ghasserni
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 625 : 385 - 392
[27] HOT-PRESSED DIBORIDE MATERIALS - FABRICATION AND CHARACTERIZATION
CLOUGHER.EV
HILL, RJ
AMERICAN CERAMIC SOCIETY BULLETIN, 1970, 49 (04): : 382 - &
[28] STRENGTH OF BORON-DOPED HOT-PRESSED SIC
PROCHAZKA, S
CHARLES, RJ
AMERICAN CERAMIC SOCIETY BULLETIN, 1973, 52 (04): : 428 - 428
[29] CHARACTERIZATION OF HOT-PRESSED CEMENTS PREPARED WITH ADMIXTURES
SARKAR, A
ROY, DM
AMERICAN CERAMIC SOCIETY BULLETIN, 1976, 55 (04): : 405 - 405
[30] FABRICATION AND CHARACTERIZATION OF ISOSTATICALLY HOT-PRESSED MGO
LEIPOLD, MH
NIELSEN, TH
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1968, 51 (02) : 94 - &

← 1 2 3 4 5 →