Series resonant high-voltage ZCS-PFM DC-DC converter for medical power electronics

In general, high-voltage DC power supplies employing a variety of high-frequency inverters: are implemented for constant value control schemes. in particular, their good transient and steady-state performances can not be achieved under wide load variations Involved in a medical-use X rev tube drive high voltage generator ranging from 20kV to 150kV In the output voltage and from 0.5mA to 1250mA, respectively. A high-voltage power supply designed for ii ray power generator applications is considered, which uses series resonant inverter-linked multistage DC voltage multiplier instead of a conventional high voltage diode module rectifier connected to the second-side of a high-voltage transformer, a constant on-time/variable frequency control scheme of this converter operating at zero-current switching modes is described. introducing the capacitor-diode based multistage voltage multiplier, the secondary turn numbers, and stray capacitance of the high-voltage high-frequency transformer as well as the rectifier diode voltage ratings can be greatly reduced. It is proven that the proposed converter control scheme of the 2 step frequency selected switching is more effective for improving output voltage responses. A series resonant high-frequency transformer-linked voltage-multiplying rectifier is evaluated for an X ray high-voltage generator on the basis of simulation analysis and observed data in experiment.