Steel Surface Wear under Adhesive Friction Conditions

被引：1
|
作者：
Kalashnikov, N. [1 ]
Ivanov, A. N. [1 ]
Beloborodov, V. A. [1 ]
机构：
[1] RAS, SB, Inst Strength Phys & Mat Sci, 2-4 Pr Akad Skii, Tomsk 634055, Russia
来源：
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019 | 2019年 / 2167卷
关键词：
ALLOYS;
D O I：
10.1063/1.5132011
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This work is devoted to the study of the features of surface wear of tool steel at adhesive contact with an aluminum alloy. It is revealed that with increasing speed and friction distance the depth of the wear path increases as well. With further increase in the speed, the wear depth is reduced due to the fact that adhesive processes are activated at high friction rates and a transfer layer is formed on the steel disc surface. It was observed that the difference in friction coefficient values is not large, which means that the dependence of friction coefficient on the speed is insignificant.
引用
收藏
页数：5
相关论文
共 50 条
  • [31] Comparative study of wear mechanism of surface treated AISI 316L stainless steel
    Dogan, H
    Findik, F
    Oztarhan, A
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2003, 55 (2-3) : 76 - 83
  • [32] Improvement in the Wear Resistance under Dry Friction of Electrodeposited Fe-W Coatings through Heat Treatments
    Mulone, Antonio
    Nicolenco, Aliona
    Imaz, Naroa
    Martinez-Nogues, Vanesa
    Tsyntsaru, Natalia
    Cesiulis, Henrikas
    Klement, Uta
    COATINGS, 2019, 9 (02):
  • [33] Investigation of surface grinding on Inconel under distinct cooling conditions
    Ganesh, M.
    Arunkumar, N.
    Kumar, N. E. Arun
    Sathish, R.
    MATERIALS AND MANUFACTURING PROCESSES, 2023, 38 (14) : 1823 - 1836
  • [34] Study of Adhesive Wear Test on TiSi, AlTi, and WTi Coatings
    Gordillo, Oscar
    Hincapie, Williams
    Piamba, Oscar
    Olaya, Jhon
    Trava-Airoldi, Vladimir
    COATINGS, 2022, 12 (10)
  • [35] Experimental study on adhesive wear of milling insert with complex groove
    Tan, Guangyu
    Liu, Guangjun
    Li, Guanghui
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 44 (7-8): : 631 - 637
  • [36] The relationship between the electron work function and friction behavior of passive alloys under different conditions
    Liu, Shiyi
    Lu, Hao
    Li, D. Y.
    APPLIED SURFACE SCIENCE, 2015, 351 : 316 - 319
  • [37] Friction stir welding of multilayered steel
    Taendl, J.
    Nambu, S.
    Inoue, J.
    Enzinger, N.
    Koseki, T.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (03) : 244 - 253
  • [38] Tribotechnical Properties of Sintered Antifriction Aluminum-Based Composite under Dry Friction against Steel
    Rusin, Nikolay M.
    Skorentsev, Alexander L.
    Krinitcyn, Maksim G.
    Dmitriev, Andrey I.
    MATERIALS, 2022, 15 (01)
  • [39] Friction and wear behavior of single-phase high-entropy alloyFeCoNiCrMn under MoS2-oil lubrication
    Wang, Hao
    Ren, Kai
    Xie, Jin
    Zhang, Chen
    Tang, Wencheng
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2020, 72 (05) : 665 - 672
  • [40] Fretting wear behavior of bulk amorphous steel
    Huang, Dongya
    Li, Ran
    Huang, Lu
    Ji, Vincent
    Zhang, Tao
    INTERMETALLICS, 2011, 19 (10) : 1385 - 1389
12345