Mechanical analysis and interpretation of excavation damage zone formation around deep tunnels within massive rock masses using hybrid finite-discrete element approach: case of Atomic Energy of Canada Limited (AECL) Underground Research Laboratory (URL) test tunnel

The construction of an underground opening leads to changes in the in situ stress regime surrounding the excavation. The opening influences the rock mass owing to the redistribution of the stresses and results in the disturbance of the surrounding ground. At great depths, massive to slightly or moderately fractured rock masses are usually encountered, and under high stresses, they are more likely to behave in a brittle manner during an excavation. While constitutive models have been developed and proposed for the numerical simulation of such excavations using continuum mechanics, this brittle response cannot be simulated accurately enough, since the material behaviour is governed by fracture initiation and propagation. On the contrary, discontinutun approaches are more suitable in such cases. For the purposes of this paper, the brittle behaviour of hard, massive rock masses and the associated spalling failure mechanisms were simulated by employing a finite-discrete element method (FDEM) approach using Irazu software. The generated numerical model was utilized to replicate field conditions based on the observations at the Atomic Energy of Canada Limited (AECL) Underground Research Laboratory (URL) test tunnel located in Pinawa, Manitoba, Canada. The model results are compared with field observation data to explicitly demonstrate the suitability of the method.