Development of the focal plane PNCCD camera system for the X-ray space telescope eROSITA

A so-called PNCCD a special type of CCD was developed twenty years ago as focal plane detector for the XMM-Newton X-ray astronomy mission of the European Space Agency ESA. Based on this detector concept and taking into account the experience of almost ten years of operation in space a new X-ray CCD type was designed by the MPI semiconductor laboratory for an upcoming X-ray space telescope called eROSITA (extended Roentgen survey with an imaging telescope array) This space telescope will be equipped with seven X-ray mirror systems of Wolter-I type and seven CCD cameras placed in their foci The instrumentation permits the exploration of the X-ray universe in the energy band from 03 up to 10 key by spectroscopic measurements with a time resolution of 50 ms for a full image comprising 384 x 384 pixels Main scientific goals are an all-sky survey and investigation of the mysterious Dark Energy The eROSITA space telescope which is developed under the responsibility of the Max-Planck-Institute for extraterrestrial physics is a scientific payload on the new Russian satellite Spectrum-Roentgen-Gamma (SRG) The mission is already approved by the responsible Russian and German space agencies After launch in 2012 the destination of the satellite is Lagrange point L2 The planned observational program takes about seven years We describe the design of the eROSITA camera system and present important test results achieved recently with the eROSITA prototype PNCCD detector This includes a comparison of the eROSITA detector with the XMM-Newton detector (C) 2010 Elsevier B V All rights reserved