A 2.5GHz Phase-Switching PLL using a supply controlled 2-delay-stage 10GHz Ring Oscillator for improved Jitter/Mismatch

A fully integrated ring oscillator PLL for hard disk channel applications is presented. A number of 16 equidistant phases of the output clock, programmable in 0.4% steps between 200 MHz and 2.5 GHZ are achieved by the use of a phase-switching fractional N architecture. Phase mismatch is optimized by the use of a novel two delay stage ring oscillator running at 4x output frequency (800 MHz-10 GHz) and a subsequent divider chain. Jitter and Area consumption are improved by solely controlling the VCO via its power supply. The proposed VCO's jitter/power/number of stages relationship behaves analogue to a single ended structure although the ring delivers 4 differential clock phases. The PLL was built in standard 0.12 mu m CMOS technology. It achieves a phase noise performance of -96 dBc/Hz @ 1 MHz offset on a 1.6 GHz signal. The integrated jitter in the measured band (10 kHz-10 MHz) is 3.8 ps. The PLL consumes 0.06 mm(2) only.