Pitting corrosion of welded joints of austenitic stainless steels studied by using an electrochemical minicell

被引：113

作者：

Garcia, C. ^{[1
]}

Martin, F. ^{[1
]}

de Tiedra, P. ^{[1
]}

Blanco, Y. ^{[1
]}

Lopez, M. ^{[1
]}

机构：

[1] Univ Valladolid, ETSII, E-47011 Valladolid, Spain

来源：

CORROSION SCIENCE | 2008年 / 50卷 / 04期

关键词：

stainless steel; polarization; pitting corrosion; welding;

D O I：

10.1016/j.corsci.2007.11.028

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A pitting corrosion study of welded joints of austenitic stainless steels (AISI 304 and 316L) has been addressed. A specific small-scale electrochemical cell (minicell) has been used. Four different weldment zones have been studied. The electrochemical methods applied were the potentiodynamic anodic polarization test and cyclic potentiodynamic polarization measurements. These techniques showed that the HAZ was the most critical zone for pitting corrosion for both materials. The results were correlated to the microstructural features of the materials. Finally, a comparative study between minicell and lacquer coating techniques has been done. The results show that it is advisable to use the minicell device if reliable results are wanted. (C) 2007 Elsevier Ltd. All rights reserved.

引用

页码：1184 / 1194

页数：11

共 38 条

[1] Materials performance in SWRO desalination plant at KISR research and development program [J].