Grains, deformation substructures, and slip bands observed in thermosonic copper ball bonding

被引：74

作者：

Murali, S ^{[1
]}

Srikanth, N ^{[1
]}

Vath, CJ ^{[1
]}

机构：

[1] ASM Technol Singapore Pte Ltd, Dept Res & Dev, Singapore 768924, Singapore

来源：

MATERIALS CHARACTERIZATION | 2003年 / 50卷 / 01期

关键词：

copper ball bonding; ultrasonic wire bonding; columnar grains; deformation substructures; slip bands;

D O I：

10.1016/S1044-5803(03)00102-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In integrated circuit manufacturing, bonding a copper wire of diameter 25-75 mum (1-3 mil) on an aluminum-metallized silicon substrate has been accomplished by the application of ultrasonic energy along with compressive force at 200 degreesC. Prior to the bonding, the wire tip was melted by electric sparking to form a spherical ball, which, when analyzed, displayed columnar grain growth. Microstructural study of the final bonding showed that the application of ultrasonic energy resulted in the subdivision of the grains of a few micrometers in size, giving rise to deformation substructures (or cells). In addition, slip bands were observed inside the cells. Microhardness studies showed that the ball bonds had a higher hardness (112 VHN) than that of the unannealed bare copper wire (102 VHN), suggesting that the applied ultrasonic energy strain hardened the copper ball by creating the deformation substructures and slip bands. Furthermore, the heat-affected zone above the copper ball clearly contained recrystallized grains along with deformation markings. (C) 2003 Published by Elsevier Inc.

引用

页码：39 / 50

页数：12

共 25 条

[1] CELL AND BAND STRUCTURES IN COLD-ROLLED POLYCRYSTALLINE COPPER [J].

ANANTHAN, VS ;

LEFFERS, T ;

HANSEN, N .

MATERIALS SCIENCE AND TECHNOLOGY, 1991, 7 (12) :1069-1075

[2]

*ASM, 1985, METALS HDB, V9, P399

[3]

*ASM INT, 1985, MET HDB, V9, P601

[4]

*ASM INT, 1988, MET HDB, V15, P114

[5]

*ASM INT, 1990, MET HDB, V2, P1099

[6]

ATSUMI K, 1986, P IEEE EL COMP 36 C, P312

[7] MELTING AND SOLIDIFICATION OF THIN WIRES - A CLASS OF PHASE-CHANGE PROBLEMS WITH A MOBILE INTERFACE .2. EXPERIMENTAL CONFIRMATION [J].

COHEN, IM ;

HUANG, LJ ;

AYYASWAMY, PS .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1995, 38 (09) :1647-1659

[8]

DAMASK AC, 1971, POINT DEFECTS MATALS, P217

[9]

HANSEN N, 1990, MATER SCI TECH-LOND, V6, P1039, DOI 10.1179/026708390790189993

[10]

HARMAN G, 1997, WIRE BONDING MICROEL, P1

← 1 2 3 →