Development of a catalytic combustor for a heavy-duty utility gas turbine

Catalytic combustion is an attractive technology for gas turbine applications where ultra-low emission levels are required. Recent tests of a catalytic reactor in a full scale combustor have demonstrated emissions of 3.3 ppm NOx, 2.0 ppm CO, and 0.0 ppm UHC. The catalyst system is designed to only convert about half of the natural gas fuel within the catalyst itself, thus limiting the catalyst temperature to a level that is viable for long-term use. The remainder of the combustion occurs downstream from the catalyst to generate the required inlet temperature to the turbine. Catalyst development is typically done using subscale prototypes in a reactor system designed to simulate the conditions of the full scale application. The validity of such an approach is best determined experimentally by comparing catalyst performance at the two size scales under equivalent reaction conditions. Such a comparison has recently been achieved for catalysts differing in volume by two orders of magnitude. The performance of the full scale catalyst was similar to that of the subscale unit in both emission levels and internal temperatures. This comparison lends credibility to the use of subscale reactors in developing catalytic combustors for gas turbines. (C) 1999 Elsevier Science B.V. All rights reserved.