Effects of cold rolling on the microstructure and properties of Fe-Cr-Ni-Mo-Ti maraging steel

被引：34

作者：

Lian, Yong ^{[1
]}

Huang, Jinfeng ^{[2
]}

Zhang, Jin ^{[1
]}

Zhao, Chao ^{[1
]}

Gao, Wen ^{[1
]}

Zhang, Zunjun ^{[2
]}

Ma, Minyu ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Inst Adv Mat & Technol, Beijing 100083, Peoples R China

[2] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2018年 / 712卷

关键词：

Maraging steel; Cold rolling; Age hardening; Microstructure; Mechanical properties; INCIDENTAL DISLOCATION BOUNDARIES; LATH MARTENSITE; MECHANICAL-PROPERTIES; PRECIPITATION; BEHAVIOR; ALLOY; DEFORMATION; KINETICS; PHASE;

D O I：

10.1016/j.msea.2017.12.041

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effects of cold deformation on the evolution of the microstructure and mechanical properties of Fe-Cr-Ni-Mo-Ti maraging steel were investigated. The microstructural changes during cold rolling were observed using optical microscopy (OM), electron back-scattered diffraction (EBSD), transmission electron microscopy (TEM) and X-ray diffraction (XRD), which were related to the mechanical properties as measured by micro-hardness and tensile testing. The remaining austenite in the as-quenched specimens was found to transform into martensite during cold deformation. High-density dislocations were produced in the martensite matrix by plastic deformation, which accelerate the aging response by promoting the formation of eta-Ni3Ti precipitates. The strain hardening was partially conserved due to static recovery during the aging process. The cold rolled steel showed a very high hardening response, resulting in an increase in yield strength during the subsequently aging treatment at 510 degrees C, with a detectable loss in ductility.

引用

页码：663 / 670

页数：8

共 27 条

[1]

[Anonymous], 1968, SP5051 NASA

[2]

ASTM ESM-04, 2004, STAND TEST METH TES

[3]

Callister W.D., 2003, Fundamentals of Materials Science and Engineering, V6th

[4] Quantification of phase transformation kinetics of 18 wt.% NiC250 maraging steel [J].

Guo, Z ;

Sha, W ;

Li, D .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 373 (1-2) :10-20

[5] A high temperature mechanical study on PH 13-8 Mo maraging steel [J].

Huang, Z. ;

Abad, M. D. ;

Ramsey, J. K. ;

de Figueiredo, M. Rebelo ;

Kaoumi, D. ;

Li, N. ;

Asta, M. ;

Gronbech-Jensen, N. ;

Hosernann, P. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 651 :574-582

[6] Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations [J].

Hughes, DA ;

Hansen, N ;

Bammann, DJ .

SCRIPTA MATERIALIA, 2003, 48 (02) :147-153

[7] Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation [J].

Jiang, Suihe ;

Wang, Hui ;

Wu, Yuan ;

Liu, Xiongjun ;

Chen, Honghong ;

Yao, Mengji ;

Gault, Baptiste ;

Ponge, Dirk ;

Raabe, Dierk ;

Hirata, Akihiko ;

Chen, Mingwei ;

Wang, Yandong ;

Lu, Zhaoping .

NATURE, 2017, 544 (7651) :460-+

[8] Effect of Heat Treatment on Microstructure and Mechanical Properties of 12Cr-10Ni-0.25Ti-0.7Mo Stainless Steel [J].

Chenna Krishna S. ;

Srinath J. ;

Jha A.K. ;

Pant B. ;

Sharma S.C. ;

George K.M. .

Metallography, Microstructure, and Analysis, 2013, 2 (04) :234-241

[9] Precipitate modification in PH13-8 Mo type maraging steel [J].

Leitner, H. ;

Schnitzer, R. ;

Schober, M. ;

Zinner, S. .

ACTA MATERIALIA, 2011, 59 (12) :5012-5022

[10] GEOMETRICALLY NECESSARY BOUNDARIES AND INCIDENTAL DISLOCATION BOUNDARIES FORMED DURING COLD DEFORMATION [J].

LIU, Q ;

HANSEN, N .

SCRIPTA METALLURGICA ET MATERIALIA, 1995, 32 (08) :1289-1295

← 1 2 3 →