Microstructure and toughening of SiC-AlN ceramics induced by seeding with α-SiC

被引:0
作者
Lim, Chang Sung [1 ]
机构
[1] Hanseo Univ, Dept Adv Mat Sci & Engn, Seosan 356706, South Korea
来源
JOURNAL OF CERAMIC PROCESSING RESEARCH | 2010年 / 11卷 / 06期
关键词
SiC-AlN; hot-press; alpha-SiC; seeding; microstructure; toughening; MECHANICAL-PROPERTIES; PHASE-SEPARATION; HIGH-TEMPERATURE; SOLID-SOLUTION; COMBUSTION SYNTHESIS; SYSTEM; COMPOSITE; STRENGTH;
D O I
暂无
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The microstructure and toughening of SiC-AlN ceramics from powder mixtures of beta-SiC, AlN and alpha-SiC by hot-pressing were studied in the 1870 to 2030 degrees C temperature range. The reaction of AlN and beta-SiC(3C) powders causing transformation to the 2H (wurtzite) structure appeared to depend on the hot-pressing temperature and the seeding with alpha-SiC. For the compositions of 49 wt% AlN/49 wt% SiC with 2 wt% alpha-SiC and 47.5 wt% AlN/47.5 wt% SiC with 5 wt% alpha-SiC heated at 2030 degrees C for 1 h, complete solid solutions with a single phase of 2H could be obtained. An appreciable amount of alpha-SiC seeding could develop columnar inter-grains of the 4H phase and the stable 2H phase with a relatively uniform composition and grain size distribution. The seeding effect of alpha-SiC on the phases present and compositional microstructures with columnar inter-grains was investigated in detail. The mechanical properties of the hot-pressed solid solutions were evaluated in terms of fracture toughness and Vickers hardness.
引用
收藏
页码:716 / 720
页数:5
相关论文
共 50 条
  • [31] Microstructure, Mechanical, and Tribological Properties of SiC-AlN-TiB2 Multiphase Ceramics
    Gong, Maoyuan
    Zhang, Hai
    Hai, Wanxiu
    Liu, Meiling
    Chen, Yuhong
    LUBRICANTS, 2024, 12 (12)
  • [32] Preparation and characterization of pure SiC ceramics by high temperature physical vapor transport induced by seeding with nano SiC particles
    Yuchen Deng
    Yaming Zhang
    Nanlong Zhang
    Qiang Zhi
    Bo Wang
    Jianfeng Yang
    Journal of Materials Science & Technology, 2019, 35 (12) : 2756 - 2760
  • [33] Microstructure Observation and Analysis of Sintered SiC Ceramics by SEM
    Jiang Yong
    Wu Laner
    Huang Zhenkun
    TESTING AND EVALUATION OF INORGANIC MATERIALS III, 2013, 544 : 200 - 204
  • [34] Sintering, high temperature strength and oxidation resistance of liquid-phase-pressureless-sintered SiC-AlN ceramics with addition of rare-earth oxides
    Magnani, Giuseppe
    Antolini, Francesco
    Beaulardi, Leandro
    Burresi, Emiliano
    Coglitore, Antonino
    Mingazzini, Claudio
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (11) : 2411 - 2417
  • [35] Effect of AlN addition on the thermal conductivity of pressureless sintered SiC ceramics
    Zhang, Chi
    Yao, Xiumin
    Li, Yinsheng
    Lian, Hanqin
    Chen, Jian
    Zhang, Jingxian
    Yang, Jian
    Li, Xiaoyun
    Qiu, Tai
    Chen, Zhongming
    Liu, Xuejian
    Huang, Zhengren
    CERAMICS INTERNATIONAL, 2015, 41 (07) : 9107 - 9114
  • [36] Fabrication and characterisation of AlN-SiC porous composite ceramics by nitridation of Al4SiC4
    Xing, Guangchao
    Deng, Chengji
    Ding, Jun
    Zhu, Hongxi
    Yu, Chao
    CERAMICS INTERNATIONAL, 2020, 46 (04) : 4959 - 4967
  • [37] Study of High-temperature MEMS Pressure Sensor based on SiC-AlN Structure
    Lv, Hao Jie
    Geng, Tao
    Hu, Guo Qing
    MICRO-NANO TECHNOLOGY XIV, PTS 1-4, 2013, 562-565 : 471 - +
  • [38] High strength of SiC-AlN-TiB2-VC multiphase ceramics induced by interface reactions
    Gong, Maoyuan
    Zhang, Hai
    Hai, Wanxiu
    Liu, Meiling
    Chen, Yuhong
    CERAMICS INTERNATIONAL, 2024, 50 (22) : 45016 - 45024
  • [39] Effects of AlN Content and Sintering Atmospheres on the Thermal Conductivity of Hot-Pressed SiC Ceramics
    Li, Jingren
    Lu, Wenzhong
    Jiang, Hai
    TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY, 2021, 80 (03) : 193 - 198
  • [40] Microstructure and Mechanical Properties of HfC-SiC Ceramics Influenced by WC Addition
    Cheng, Yue
    Tang, Huaguo
    Fang, Guangkai
    Yu, Yuan
    Wang, Lujie
    Zhang, Yanfei
    Qiao, Zhuhui
    MATERIALS, 2023, 16 (09)