Microstructure and toughening of SiC-AlN ceramics induced by seeding with α-SiC

被引:0
作者
Lim, Chang Sung [1 ]
机构
[1] Hanseo Univ, Dept Adv Mat Sci & Engn, Seosan 356706, South Korea
来源
JOURNAL OF CERAMIC PROCESSING RESEARCH | 2010年 / 11卷 / 06期
关键词
SiC-AlN; hot-press; alpha-SiC; seeding; microstructure; toughening; MECHANICAL-PROPERTIES; PHASE-SEPARATION; HIGH-TEMPERATURE; SOLID-SOLUTION; COMBUSTION SYNTHESIS; SYSTEM; COMPOSITE; STRENGTH;
D O I
暂无
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The microstructure and toughening of SiC-AlN ceramics from powder mixtures of beta-SiC, AlN and alpha-SiC by hot-pressing were studied in the 1870 to 2030 degrees C temperature range. The reaction of AlN and beta-SiC(3C) powders causing transformation to the 2H (wurtzite) structure appeared to depend on the hot-pressing temperature and the seeding with alpha-SiC. For the compositions of 49 wt% AlN/49 wt% SiC with 2 wt% alpha-SiC and 47.5 wt% AlN/47.5 wt% SiC with 5 wt% alpha-SiC heated at 2030 degrees C for 1 h, complete solid solutions with a single phase of 2H could be obtained. An appreciable amount of alpha-SiC seeding could develop columnar inter-grains of the 4H phase and the stable 2H phase with a relatively uniform composition and grain size distribution. The seeding effect of alpha-SiC on the phases present and compositional microstructures with columnar inter-grains was investigated in detail. The mechanical properties of the hot-pressed solid solutions were evaluated in terms of fracture toughness and Vickers hardness.
引用
收藏
页码:716 / 720
页数:5
相关论文
共 50 条
  • [21] Preparation and characterization of pure SiC ceramics by high temperature physical vapor transport induced by seeding with nano SiC particles
    Deng, Yuchen
    Zhang, Yaming
    Zhang, Nanlong
    Zhi, Qiang
    Wang, Bo
    Yang, Jianfeng
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (12) : 2756 - 2760
  • [22] Microstructure and mechanical properties of SiCf/SiC-AlN composites prepared by low temperature reactive melt infiltration
    Sun, Xiaofan
    Chen, Xiaowu
    Huang, Hui
    Jin, Xihai
    Kan, Yanmei
    Yang, Jinshan
    Hu, Jianbao
    Liao, Chunjing
    Liu, Ning
    Dong, Shaoming
    CERAMICS INTERNATIONAL, 2024, 50 (20) : 37844 - 37857
  • [23] Thermoelectric Properties of AlN-doped SiC Ceramics
    Pai, Chul-Hoon
    KOREAN JOURNAL OF METALS AND MATERIALS, 2012, 50 (11): : 839 - 845
  • [24] Toughening of laminated ZrB2-SiC ceramics with residual surface compression
    Zhang, Xinghong
    Zhou, Peng
    Hu, Ping
    Han, Wenbo
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (13) : 2415 - 2423
  • [25] Synergistic toughening effect of SiC whiskers and particles in ZrO2-Al2O3-SiC ceramics
    Zhu, Tianbin
    Guo, Weijie
    Zhang, Jie
    Sang, Shaobai
    Li, Yawei
    Xie, Zhipeng
    Liang, Xiong
    Wang, Heng
    Han, Yao
    CERAMICS INTERNATIONAL, 2023, 49 (22) : 36337 - 36343
  • [26] Fabricating superior thermal conductivity SiC-AlN composites from photovoltaic silicon waste
    Liu, Weiran
    Tian, Jinsai
    Xiang, Daoping
    Mao, Ruipeng
    Wang, Benxue
    JOURNAL OF CLEANER PRODUCTION, 2020, 274
  • [27] Multiscale toughening of ZrB2-SiC-Graphene@ZrB2-SiC dual composite ceramics
    Cheng, Yehong
    Lyu, Yang
    Han, Wenbo
    Hu, Ping
    Zhou, Shanbao
    Zhang, Xinghong
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2019, 102 (04) : 2041 - 2052
  • [28] Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering
    Song, Ning
    Zhang, Hai-bin
    Liu, Hong
    Fang, Jing-zhon
    CERAMICS INTERNATIONAL, 2017, 43 (09) : 6786 - 6790
  • [29] Investigation of microstructure and mechanical strength of SiC/AlN composites processed under different sintering atmospheres
    Besisa, Dina H. A.
    Ewais, Emad M. M.
    Ahmed, Yasser M. Z.
    Elhosiny, Fouad I.
    Fend, Thomas
    Kuznetsov, Denis V.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 756 : 175 - 181
  • [30] Oxidation behavior of SiC-AlN ceramics exposed to dry oxygen and water oxygen environments at 1100-1300°C
    Sun, Xiaofan
    Chen, Xiaowu
    Tan, Min
    Kan, Yanmei
    Jin, Xihai
    Wang, Zhen
    Liu, Ning
    Hu, Jianbao
    Yang, Jinshan
    Dong, Shaoming
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2025, 22 (01)