Surface modification of ZrO2-3Y2O3 ceramics with continuous Ar+ ion beams

被引:6
作者
Ghyngazov, Sergei [1 ]
Ovchinnikov, Vladimir [2 ,3 ]
Kostenko, Valeria [1 ]
Gushchina, Natalya [2 ]
Makhinko, Fedor [2 ]
机构
[1] Natl Res Tomsk Polytech Univ, 30 Lenin Av, Tomsk 634050, Russia
[2] Inst Electrophys UB RAS, 106 Amundsena St, Ekaterinburg 620016, Russia
[3] Ural Fed Tech Univ, 19 Mira St, Ekaterinburg 620002, Russia
关键词
Ar+ ion beam treatment; Partially stabilized zirconia; Microhardness; Nanohardness; XRD; Raman scattering; Cathodoluminescence; TETRAGONAL ZIRCONIA POLYCRYSTAL; MECHANICAL-PROPERTIES; PHASE-TRANSFORMATION; RAMAN-SPECTROSCOPY; OPTICAL-PROPERTIES; ZRO2; OXIDE; IRRADIATION; ELECTRON; BEHAVIOR;
D O I
10.1016/j.surfcoat.2020.125598
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Microindentation and nanoindentation methods have been used to study the changes in microhardness, nanohardness and elastic modulus of partially stabilized zirconia ceramics before and after its treatment with a continuous Ar+ ion beam. The accelerating voltage was 30 kV. The experiments were performed at current densities (j) of 300 and 500 mu A/cm(2). The fluence was 10(16)-10(18) cm(-2). It is shown that Ar+ ion beam treatment increases the strength of the near-surface layers at a depth exceeding the penetration depth of accelerated ions by an order of magnitude or more. This indicates a long-range effect, which has been discovered earlier during ion beam treatment of metals and alloys. Treatment with ion current density of 300 mu A/cm(2) at a fluence of 1.1 x 10(17) and 5 x 10(17) cm(-2) maximally increases microhardness and nanohardness (by 14%), and elastic modulus (by 20%). The phase composition of ceramics was studied using the XRD analysis. Additionally, ceramic samples were studied using the methods of Raman scattering and pulsed cathodoluminescence. The XRD analysis indicated that Ar+ ion beam treatment changes the phase composition of the near-surface layer several micrometers deep. The analysis of structural changes in the surface layers showed that continuous Ar+ ion beam treatment results in surface recrystallization, and it is not followed by negative processes, such as melting, cracking and erosion, observed during treatment by high-intensity pulsed ion beams. Shock-wave mechanisms of ceramic layer hardening and those related to accumulation of high static stresses and generation of dislocations are discussed.
引用
收藏
页数:8
相关论文
共 93 条
[51]   Effect of calcium salts on isosynthesis over ZrO2 catalysts [J].
Li, YW ;
He, DH ;
Cheng, ZX ;
Su, CL ;
Li, JR ;
Zhu, QM .
JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL, 2001, 175 (1-2) :267-275
[52]   New zirconia-based materials for dental applications. Structural, morphological and histological evaluation [J].
Matei, Madalina ;
Voinea, Elena-Adriana ;
Rica, Radu ;
Manolea, Horia ;
Mogoanta, Laurentiu ;
Salan, Alex ;
Rica, Ana ;
Dinescu, Venera Cristina ;
Cioatera, Nicoleta .
CERAMICS INTERNATIONAL, 2019, 45 (12) :14859-14866
[53]   Effect on structure and mechanical property of tungsten irradiated by high intensity pulsed ion beam [J].
Mei, Xianxiu ;
Zhang, Xiaonan ;
Liu, Xiaofei ;
Wang, Younian .
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2017, 406 :697-702
[54]   Corrosion of Zirconium Alloys Used for Nuclear Fuel Cladding [J].
Motta, Arthur T. ;
Couet, Adrien ;
Comstock, Robert J. .
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 45, 2015, 45 :311-343
[55]   Photoluminescence excitation bands corresponding to defect states due to oxygen vacancies in yttria-stabilized zirconia [J].
Nakajima, H ;
Mori, T .
JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 408 :728-731
[56]   Features of Melting Alloys Based on Titanium Nickelide in Inert Ceramic Crucibles [J].
Ospennikova, O. G. ;
Evgenov, A. G. ;
Chabina, E. B. ;
Filonova, E. V. ;
Ignatov, V. A. .
METALLURGIST, 2018, 62 (7-8) :790-800
[57]   Nanoscale dynamic and long-range effects under cascade-forming irradiation [J].
Ovchinnikov, V. V. .
SURFACE & COATINGS TECHNOLOGY, 2018, 355 :65-83
[58]  
Pathania D, 2018, SMART CERAMICS: PREPARATION, PROPERTIES, AND APPLICATIONS, P33
[59]   Robocasting of dense yttria-stabilized zirconia structures [J].
Peng, Erwin ;
Wei, Xiangxia ;
Garbe, Ulf ;
Yu, Dehong ;
Edouard, Brunet ;
Liu, Aihong ;
Ding, Jun .
JOURNAL OF MATERIALS SCIENCE, 2018, 53 (01) :247-273
[60]   On the thermodynamics and microstructure of variably cooled and co-doped Y2O3-ZrO2 for application to thermal barrier coatings [J].
Petitjean, Jules E. ;
Kearsey, Rick M. ;
Huang, Xiao .
SURFACE & COATINGS TECHNOLOGY, 2010, 205 (07) :1843-1849