Interface Temperature Measurement and Experimental Studies of Super-high Speed Polishing of CVD diamond Films

被引：0

作者：

Huang, Shutao ^{[1
]}

Zhou, Li ^{[1
]}

Xu, Lifu ^{[1
]}

机构：

[1] Shenyang Ligong Univ, Sch Mech Engn, Shenyang 110159, Peoples R China

来源：

SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II | 2010年 / 135卷

关键词：

Super-high speed polishing; CVD diamond film; Interface temperature; Polishing plate material; POLYCRYSTALLINE DIAMOND; SURFACE;

D O I：

10.4028/www.scientific.net/AMR.135.271

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Super-high speed polishing of diamond film is a newly proposed method due to its outstanding features such as low cost and simple apparatus. The interface temperature rise is due to the friction force and the relative sliding velocity between the CVD diamond film and the polishing metal plate surface. In this paper, the interface temperature rise in super-high speed polishing of CVD diamond film was investigated by using the single-point temperature measurement method. Additionally, the influence of polishing plate material on the characteristics of super-high speed polishing has been studied. The results showed that cast iron is not suitable for super-high polishing, while both 0Cr18Ni9 stainless steel and pure titanium can be used for the super-high polishing of CVD diamond film. The quality and efficiency of polishing with 0Cr18Ni9 stainless steel plate is much higher than those of pure titanium, and the material removal rate could reach to 36-51 mu m/h when the polishing speed and pressure are 100 m/s and 0.17-0.31 MPa, respectively.

引用

页码：271 / 276

页数：6

共 50 条

[31] Design consideration of a super-high speed high temperature superconductor maglev evacuated tube transport (I)
Jing Jiang
Xue Bai
Lei Wu
Yong Zhang
Journal of Modern Transportation, 2012, 20 (2): : 108 - 114
[32] Implementation and experimental investigation of sensorless control schemes for PMSM in super-high variable speed operation
Xu, LY
Wang, CJ
CONFERENCE RECORD OF THE 1998 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-3, 1998, : 483 - 489
[33] Experimental observation and numerical analysis of break-time of super-high speed explosive bridge
Kang, Li-Xia
Cao, Yi-Hua
Cailiao Kexue yu Gongyi/Material Science and Technology, 2005, 13 (06): : 623 - 626
[34] Measurement of transient temperature at super-high-speed deformation
Gao, Chong
Iwamoto, Takeshi
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, 206
[35] High temperature surface graphitization of CVD diamond films and analysis of the kinetics mechanism
Yan, Xiongbo
Wei, Junjun
An, Kang
Liu, Jinlong
Chen, Liangxian
Zheng, Yuting
Zhang, Xiaotong
Li, Chengming
DIAMOND AND RELATED MATERIALS, 2021, 120
[36] High-pressure and high-temperature annealing effects on CVD homoepitaxial diamond films
Ueda, K.
Kasu, M.
Tallaire, A.
Makimoto, T.
DIAMOND AND RELATED MATERIALS, 2006, 15 (11-12) : 1789 - 1791
[37] Simulation of Temperature Field of Oil Film in Super-high Speed Hybrid Journal Bearing Based on FLUENT
Xiu, S. C.
Xiu, P. B.
Gao, S. Q.
ULTRA-PRECISION MACHINING TECHNOLOGIES, 2009, 69-70 : 296 - +
[38] Simulation of temperature field of oil film in super-high speed hybrid journal bearing based on fluent
School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China
不详
Adv. Mater. Res., 1600, (296-300):
[39] Hydrogen termination of CVD diamond films by high-temperature annealing at atmospheric pressure
Seshan, V.
Ullien, D.
Castellanos-Gomez, A.
Sachdeva, S.
Murthy, D. H. K.
Savenije, T. J.
Ahmad, H. A.
Nunney, T. S.
Janssens, S. D.
Haenen, K.
Nesladek, M.
van der Zant, H. S. J.
Sudholter, E. J. R.
de Smet, L. C. P. M.
JOURNAL OF CHEMICAL PHYSICS, 2013, 138 (23):
[40] Calculation and experimental study on heating temperature field of super-high strength aluminum alloy thick plate
Fan, Shi-tong
Deng, Yun-lai
Zhang, Jin
Guo, Xiao-bin
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2017, 27 (11) : 2415 - 2422

← 1 2 3 4 5 →