An investigation on the formation and propagation of shear band in fine-blanking process

被引:53
作者
Chen, ZH [1 ]
Chan, LC [1 ]
Lee, TC [1 ]
Tang, CY [1 ]
机构
[1] Hong Kong Polytech Univ, Dept Ind & Syst Engn, Hong Kong, Hong Kong, Peoples R China
关键词
fine-blanking; shear bands; microstructure;
D O I
10.1016/S0924-0136(03)00141-9
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
An investigation has been made on the formation and propagation of shear band in fine-blanking process. Examinations by optical microscopy and SEM reveal that the highly elongated narrow subgrains extended in the shear direction within the band, while in the other regions, fine equiaxed cell were observed. Both the presence of white-etching trace and the distribution of surface microhardness in the shear band reveal that fine-blanking process involves large deformation and high temperature. Although strain localization is severe in the shear band, especially in the area adjacent to the edges of the punch and die, no cracking has been observed. It is indicated that high hydrostatic pressure, built up by specially designed fine-blanking fixture, plays a significant role to suppress the generation of fracture zones in the sheared surface. On the basis of present findings, the mechanisms of the formation and propagation of shear band in fine-blanking are discussed. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码:610 / 614
页数:5
相关论文
共 8 条
[1]  
Bai Y., 1992, Adiabatic Shear Localization: Occurrence, Theories and Applications, P1
[2]   MICROSCOPIC OBSERVATIONS OF ADIABATIC SHEAR BANDS IN 3 DIFFERENT STEELS [J].
CHO, K ;
CHI, YC ;
DUFFY, J .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1990, 21 (05) :1161-1175
[3]   ADIABATIC SHEAR BAND FORMATION DURING DYNAMIC TORSIONAL DEFORMATION OF AN HY-100 STEEL [J].
CHO, KM ;
LEE, S ;
NUTT, SR ;
DUFFY, J .
ACTA METALLURGICA ET MATERIALIA, 1993, 41 (03) :923-932
[4]  
JOHNSON R, 1968, P 9 INT MACH TOOL DE, P397
[5]   STRAINING BEHAVIOR IN BLANKING PROCESS - FINE BLANKING VS CONVENTIONAL BLANKING [J].
LEE, TC ;
CHAN, LC ;
WU, BJ .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 48 (1-4) :105-111
[6]   Adiabatic shear localization in the dynamic punch test. part I: Experimental investigation [J].
Roessig, KM ;
Mason, JJ .
INTERNATIONAL JOURNAL OF PLASTICITY, 1999, 15 (03) :241-262
[7]  
ROGERS HC, 1983, MAT BEHAV UNDER HIGH
[8]   OBSERVATION OF AN ADIABATIC SHEAR BAND IN AISI 4340 STEEL BY HIGH-VOLTAGE TRANSMISSION ELECTRON-MICROSCOPY [J].
WITTMAN, CL ;
MEYERS, MA ;
PAK, HR .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1990, 21 (03) :707-716