Flow pattern analysis of flow boiling inside a 0.48 mm microtube

被引：20

作者：

Celata, G. P. ^{[1
]}

Cumo, M. ^{[2
]}

Dossevi, D. ^{[3
]}

Jilisen, R. T. M. ^{[4
]}

Saha, S. K. ^{[5
]}

Zummo, G. ^{[1
]}

机构：

[1] ENEA, Rome, Italy

[2] Univ Roma La Sapienza, Rome, Italy

[3] Univ Nantes, Nantes, France

[4] Eindhoven Univ Technol, NL-5600 MB Eindhoven, Netherlands

[5] Bengal Engn & Sci Univ, Howrah, W Bengal, India

来源：

INTERNATIONAL JOURNAL OF THERMAL SCIENCES | 2012年 / 58卷

关键词：

Flow pattern; Flow boiling; Microchannel; Bubble confinement; FC-72; Visualization; HEAT-TRANSFER; 2-PHASE FLOW;

D O I：

10.1016/j.ijthermalsci.2012.03.014

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This paper presents the results of the flow boiling patterns of FC-72 in a microtube. The internal diameter of the tube is 0.48 mm, with a heated length of 73 mm. The mass flux varies from 50 to 3000 kg/m(2) s. The microtube is made of Pyrex in order to obtain the visualisation of the flow pattern along the heated channel. Different types of flow pattern have been observed: bubbly flow, deformed bubbly flow, bubbly/slug flow, slug flow, slug/annular flow, and annular flow. The flow pattern map is compared with those obtained for larger tubes (2.0, 4.0, and 6.0 mm). Flow patterns in the microtube present less chaotic behaviour and regular vapour-liquid interfaces. Besides, as the tube diameter decreases, the intermittent flow regime shifts from the saturated boiling region towards the subcooled boiling region. The experiments show the presence of flow instabilities in a large portion of the tests at low mass flux and low subcooling. Flow patterns in presence of flow instabilities are mainly characterized by bubbly/slug flow and slug/annular flow. The experimental results of flow pattern are compared with the flow pattern maps of [8,9,10]. (C) 2012 Elsevier Masson SAS. All rights reserved.

引用

页码：1 / 8

页数：8

共 11 条

[1]

Celata G.P., 2010, P INT HEAT TRANSF C

[2]

Celata G.P., 2009, J MICROSCAL IN PRESS

[3] Heat transfer characteristics of flow boiling in a single horizontal microchannel [J].

Celata, Gian Piero ;

Saha, Sujoy Kumar ;

Zummo, Giuseppe ;

Dossevi, Denam .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010, 49 (07) :1086-1094

[4]

Cheng P., 2006, ADV HEAT TRANSFER, V39, P461

[5] Correlations for the prediction of boiling heat transfer in small-diameter channels [J].

Kew, PA ;

Cornwell, K .

APPLIED THERMAL ENGINEERING, 1997, 17 (8-10) :705-715

[6]

Kline S.J., 1952, ASME Mechanical Engineering, V75, P3, DOI DOI 10.1016/J.CHAOS.2005.11.046

[7] FLOW PATTERNS IN VERTICAL 2-PHASE FLOW [J].

MCQUILLAN, KW ;

WHALLEY, PB .

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 1985, 11 (02) :161-175

[8]

MISHIMA K, 1984, INT J HEAT MASS TRAN, V27, P723, DOI 10.1016/0017-9310(84)90142-X

[9] Macro-to-microchannel transition in two-phase flow: Part 1-Two-phase flow patterns and film thickness measurements [J].

Ong, C. L. ;

Thome, J. R. .

EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2011, 35 (01) :37-47

[10]

Radovich N.A., 1962, THESIS MIT

← 1 2 →