A Multibody System Approach for the Systematic Development of a Closed-Chain Kinematic Model for Two-Wheeled Vehicles

In this investigation, a closed-chain kinematic model for two-wheeled vehicles is devised. The kinematic model developed in this work is general and, therefore, it is suitable for describing the complex geometry of the motion of both bicycles and motorcycles. Since the proposed kinematic model is systematically developed in the paper by employing a sound multibody system approach, which is grounded on the use of a straightforward closed-chain kinematic description, it allows for readily evaluating the effectiveness of two alternative methods to formulate the wheel-road contact constraints. The methods employed for this purpose are a technique based on the geometry of the vector cross-product and a strategy based on a simple surface parameterization of the front wheel. To this end, considering a kinematically driven vehicle system, a comparative analysis is performed to analyze the geometry of the contact between the front wheel of the vehicle and the ground, which represents a fundamental problem in the study of the motion of two-wheeled vehicles in general. Subsequently, an exhaustive and extensive numerical analysis, based on the systematic multibody approach mentioned before, is carried out in this work to study the system kinematics in detail. Furthermore, the orientation of the front assembly, which includes the frontal fork, the handlebars, and the front wheel in a seamless subsystem, is implicitly formulated through the definition of three successive rotations, and this approach is used to propose an explicit formulation of its inherent set of Euler angles. In general, the numerical results developed in the present work compare favorably with those found in the literature about vehicle kinematics and contact geometry.