Evaluation of Coupling Agents in Poly(propylene)/Fly Ash Composites: Effect on Processing and Mechanical Properties

被引:14
作者
Iraola-Arregui, Itziar [2 ]
Potgieter, Herman [3 ]
Liauw, Christopher Mark [1 ]
机构
[1] Manchester Metropolitan Univ, Div Mech Engn, Manchester M1 5GD, Lancs, England
[2] Manchester Metropolitan Univ, Div Chem & Environm, Manchester M1 5GD, Lancs, England
[3] Manchester Metropolitan Univ, Sch Res Enterprise & Innovat, Manchester M1 5GD, Lancs, England
关键词
composites; coupling agent; fly ash; mechanical properties; poly(propylene); PULVERIZED FUEL ASH; FLY-ASH; HYDROXIDE COMPOSITES; POLYMER COMPOSITES; CALCIUM-CARBONATE; FILLER;
D O I
10.1002/mame.201000413
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Composites containing 50 wt.-% fly ash in a PP homopolymer were prepared via batch mixing and compression moulding. The following coupling agents were evaluated: Lubrizol Solplus C800, N,N'-(1,3-phenylene)dimaleimide, gamma-methacryloxypropyltrimethoxysilane and maleic-anhydride-grafted PP. At the filler level investigated, C800 gave the best balance of composite strength and toughness. In the latter case filler-matrix adhesion appeared weaker relative to gamma-MPS, BMI and m-PP, all of which gave excessively strong filler-matrix adhesion leading to a reduction in composite toughness. The unexpected weakness of the C800/fly ash interaction may be related to removal of surface calcium ions from the fly ash via reaction of a single calcium ion with two C800 molecules.
引用
收藏
页码:810 / 819
页数:10
相关论文
共 50 条
  • [21] Effect of fly ash and coupling agent on the structural, morphological, thermal, and mechanical properties of polyamide 6/acrylonitrile-butadiene-styrene blend
    Ez-Zahraoui, Siham
    Kassab, Zineb
    Ablouh, El-houssaine
    Sehaqui, Houssine
    Bouhfid, Rachid
    Alami, Jones
    El Achaby, Mounir
    Qaiss, Abou El Kacem
    POLYMER COMPOSITES, 2021, 42 (07) : 3518 - 3538
  • [22] Innovative Fly Ash Geopolymer-Epoxy Composites: Preparation, Microstructure and Mechanical Properties
    Roviello, Giuseppina
    Ricciotti, Laura
    Tarallo, Oreste
    Ferone, Claudio
    Colangelo, Francesco
    Roviello, Valentina
    Cioffi, Raffaele
    MATERIALS, 2016, 9 (06)
  • [23] Influence of silane-coupling agents on the performance of morphological, mechanical, thermal, electrical, and rheological properties of polycarbonate/fly ash composites
    Parvaiz, Mohammad Rahail
    POLYMER COMPOSITES, 2012, 33 (10) : 1798 - 1808
  • [24] Mechanical Properties of Engineered Cementitious Composites with High Volume Fly Ash
    祝瑜
    杨英姿
    Journal of Wuhan University of Technology(Materials Science), 2009, (S1) : 166 - 170
  • [25] The Combined Effect of Banana Fiber and Fly Ash Reinforcements on the Mechanical Behavior of Polyester Composites
    Kannan, Gokul
    Thangaraju, Rajasekaran
    Kayaroganam, Palanikumar
    Davim, J. Paulo
    JOURNAL OF NATURAL FIBERS, 2022, 19 (15) : 11384 - 11403
  • [26] Studies on Effect of a Silane Coupling Agent (TESPT) on the Properties of Fly Ash-Natural Rubber Composite
    Maan, Arti
    Niyogi, Utpal Kumar
    Singh, Anil Kumar
    Mehra, Dayal Singh
    Rattan, Sunita
    JOURNAL OF POLYMER MATERIALS, 2015, 32 (01): : 45 - 55
  • [27] Mechanical and thermal properties of flexible poly(propylene) composites
    Houshyar, S
    Shanks, RA
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2006, 291 (01) : 59 - 67
  • [28] Study on thermal, mechanical and morphological properties of recycled poly(vinyl chloride)/fly ash composites
    Gohatre, Omdeo Kishorrao
    Biswal, Manoranjan
    Mohanty, Smita
    Nayak, Sanjay K.
    POLYMER INTERNATIONAL, 2020, 69 (06) : 552 - 563
  • [29] Effects of inorganic-organic surface modification on the mechanical and thermal properties of poly(vinyl chloride) composites reinforced with fly-ash
    Xue, Caihong
    Nan, Hui
    Lu, Yunhua
    Chen, Huiyuan
    Zhao, Chunyan
    Xu, Shiai
    POLYMER COMPOSITES, 2021, 42 (04) : 1867 - 1877
  • [30] Effect of particle size of fly ash on recycled poly (ethylene terephthalate) / fly ash composites
    Sharma, Amit Kumar
    Mahanwar, Prakash A.
    INTERNATIONAL JOURNAL OF PLASTICS TECHNOLOGY, 2010, 14 (01) : 53 - 64