Magnetic Properties and Domain Structure of Alloy Sm(Co, Fe, Cu, Zr)7.5 in Different Stages of Heat Treatment

被引:0
|
作者
Lileev, A. S. [1 ]
Konyukhov, Yu. V. [1 ]
机构
[1] NITU MISiS, Moscow, Russia
关键词
permanent magnets; Sm(Co; Fe; Cu; Zr)(z) system; heat treatment; structure; magnetic properties;
D O I
10.1007/s11041-021-00660-2
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The magnetic properties and the changes in the domain structure of alloy Sm(Co, Fe, Cu, Zr)(7.5) are studied after different variants of heat treatment, i.e. (1) quenching from 1200 degrees C with cooling in a helium jet; (2) quenching and tempering at 800 degrees C for 16 h, cooling at a rate of 50 K/min to room temperature; and (3) quenching, tempering at 800 degrees C for 16 h, and cooling at a rate of 1.7 K/min. The influence of the heat treatment modes on the coercivity and the domain sizes is determined. The mechanism of variation of these characteristics is analyzed.
引用
收藏
页码:140 / 143
页数:4
相关论文
共 50 条
  • [1] Magnetic Properties and Domain Structure of Alloy Sm(Co, Fe, Cu, Zr)7.5 in Different Stages of Heat Treatment
    A. S. Lileev
    Yu. V. Konyukhov
    Metal Science and Heat Treatment, 2021, 63 : 140 - 143
  • [2] Simulation of Domain Structure in Sm(Co, Fe, Cu, Zr)7.5-Type Alloy After Different Heat Treatments
    Lileev, A. S.
    METAL SCIENCE AND HEAT TREATMENT, 2020, 62 (7-8) : 508 - 512
  • [3] Simulation of Domain Structure in Sm(Co, Fe, Cu, Zr)7.5-Type Alloy After Different Heat Treatments
    A. S. Lileev
    Metal Science and Heat Treatment, 2020, 62 : 508 - 512
  • [4] Effect of rapid quenching speeds on phase structure and magnetic properties of melt-spun Sm(Co,Fe,Cu,Zr)7.5 ribbons
    Sun, J. B.
    Zhang, Z. X.
    Cui, C. X.
    Yang, W.
    Guo, P.
    Han, D.
    Wang, B. L.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 476 (1-2) : 575 - 578
  • [5] Effect of heat treatment modes on the structure and magnetic properties of sintered permanent magnets based on Sm(Co, Fe, Cu, Zr) Z
    Arinicheva, O. A.
    Lileev, A. S.
    Reissner, M.
    Dormidontov, A. G.
    METAL SCIENCE AND HEAT TREATMENT, 2013, 55 (1-2) : 63 - 67
  • [6] Effect of heat treatment modes on the structure and magnetic properties of sintered permanent magnets based on Sm(Co, Fe, Cu, Zr)Z
    O. A. Arinicheva
    A. S. Lileev
    M. Reissner
    A. G. Dormidontov
    Metal Science and Heat Treatment, 2013, 55 : 63 - 67
  • [7] Mechanism of Reversible Variation of Coercivity Under “Damage – Restoration” Treatment of an Alloy of Type Sm(Co, Fe, Cu, Zr)7.5
    A. S. Lileev
    K. P. Reznikov
    Metal Science and Heat Treatment, 2021, 62 : 557 - 559
  • [8] Mechanism of Reversible Variation of Coercivity Under "Damage - Restoration" Treatment of an Alloy of Type Sm(Co, Fe, Cu, Zr)7.5
    Lileev, A. S.
    Reznikov, K. P.
    METAL SCIENCE AND HEAT TREATMENT, 2021, 62 (9-10) : 557 - 559
  • [9] Structure and Magnetic Properties of (Sm,Zr)(Co,Fe,Cu)z Alloy Powders for Bonded Magnets
    Kolchugina, N. B.
    Dormidontov, N. A.
    Prokofev, P. A.
    Milov, Yu. V.
    Andreenko, A. S.
    Sipin, I. A.
    Dormidontov, A. G.
    Bakulina, A. S.
    INORGANIC MATERIALS-APPLIED RESEARCH, 2023, 14 (5-6) : 1305 - 1311
  • [10] Structure and Magnetic Properties of (Sm,Zr)(Co,Fe,Cu)z Alloy Powders for Bonded Magnets
    N. B. Kolchugina
    N. A. Dormidontov
    P. A. Prokofev
    Yu. V. Milov
    A. S. Andreenko
    I. A. Sipin
    A. G. Dormidontov
    A. S. Bakulina
    Inorganic Materials: Applied Research, 2023, 14 : 1305 - 1311