Increasing the efficiency of PV panel with the use of PCM

被引：338

作者：

Stropnik, Rok ^{[1
]}

Stritih, Uros ^{[1
]}

机构：

[1] Univ Ljubljana, Fac Mech Engn, Askerceva 6, Ljubljana 1000, Slovenia

来源：

RENEWABLE ENERGY | 2016年 / 97卷

关键词：

Phase change material (PCM); Photovoltaic panels (PV); Trnsys; Passive cooling; PV-PCM; PHASE-CHANGE MATERIALS; THERMAL REGULATION; PHOTOVOLTAIC SYSTEMS; TEMPERATURE; PERFORMANCE; SIMULATION; STORAGE; TRNSYS; CELLS; ENHANCEMENT;

D O I：

10.1016/j.renene.2016.06.011

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

The article presents how to increase electrical efficiency and power output of photovoltaic (PV) panel with the use of a phase change material (PCM). The focus of the work is in experimental setup and simulation heat extraction from the PV panel with the use of TRNSYS software. A modification of PV panel Canadian Solar CS6P-M was made with a phase change material RT28HC. The actual data of cell temperature of a PV panel with and without PCM were given and compared. A simulation of both PV panels in TRNSYS software was performed, followed by the comparison of results with the simulation and experimental actual data. The experimental results show that the maximum temperature difference on the surface of PV panel without PCM was 35.6 degrees C higher than on a panel with PCM in a period of one day. Referring to experimental results the calculation of the maximum and average increase of electrical efficiency was made for PV-PCM panel with TRNSYS software. Final results of simulation shows that the electricity production of PV-PCM panel for a city of Ljubljana was higher for 7.3% in a period of one year. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：671 / 679

页数：9

共 29 条

[1]

Alzaabi Amna A., 2014, International Journal of Smart Grid and Clean Energy, V3, P385, DOI 10.12720/sgce.3.4.385-389

[2] Improving the efficiency of photovoltaic cells using PCM infused graphite and aluminium fins [J].

Atkin, Peter ;

Farid, Mohammed M. .

SOLAR ENERGY, 2015, 114 :217-228

[3] Phase-change materials to improve solar panel's performance [J].

Biwole, Pascal Henry ;

Eclache, Pierre ;

Kuznil, Frederic .

ENERGY AND BUILDINGS, 2013, 62 :59-67

[4]

CanadianSolar, 2013, DAT CS6P 250M

[5] Advances in liquid based photovoltaic/thermal (PV/T) collectors [J].

Daghigh, R. ;

Ruslan, M. H. ;

Sopian, K. .

RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2011, 15 (08) :4156-4170

[6] A review on phase change energy storage: materials and applications [J].

Farid, MM ;

Khudhair, AM ;

Razack, SAK ;

Al-Hallaj, S .

ENERGY CONVERSION AND MANAGEMENT, 2004, 45 (9-10) :1597-1615

[7] Coupled TRNSYS-CFD simulations evaluating the performance of PCM plate heat exchangers in an airport terminal building displacement conditioning system [J].

Gowreesunker, B. L. ;

Tassou, S. A. ;

Kolokotroni, M. .

BUILDING AND ENVIRONMENT, 2013, 65 :132-145

[8] Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics [J].

Hasan, A. ;

McCormack, S. J. ;

Huang, M. J. ;

Norton, B. .

SOLAR ENERGY, 2010, 84 (09) :1601-1612

[9] Performance assessment of a BIPV integrated with a layer of water-saturated MEPCM [J].

Ho, C. J. ;

Jou, Bor-Tyng ;

Lai, Chi-Ming ;

Huang, Chao-Yang .

ENERGY AND BUILDINGS, 2013, 67 :322-333

[10] Phase change materials for limiting temperature rise in building integrated photovoltaics [J].

Huang, M. J. ;

Eames, P. C. ;

Norton, B. .

SOLAR ENERGY, 2006, 80 (09) :1121-1130

← 1 2 3 →