Spark plasma sintering of ZrB2 powders synthesized by citrate gel method

被引:9
作者
Gocmez, Hasan [1 ]
Tuncer, Mustafa [1 ]
Bogomol, Iurii [2 ]
机构
[1] Dumlupinar Univ, Dept Mat Sci & Engn, Kutahya, Turkey
[2] Natl Tech Univ Ukraine, Igor Sikorsky Kyiv Polytech Inst, Dept Hightemp Mat & Powder Met, Kiev, Ukraine
关键词
Zirconium diboride; Spark plasma sintering; Hardness; Fracture toughness; HIGH-TEMPERATURE CERAMICS; MECHANICAL-PROPERTIES; ZRB2-BASED COMPOSITES; PHYSICAL-PROPERTIES; DENSIFICATION; MICROSTRUCTURE; B4C;
D O I
10.1016/j.ijrmhm.2018.09.008
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The densification behavior of nanocrystalline zirconium diboride (ZrB2) powders with nickel (5 vol%) is reported by spark plasma sintering (SPS) technique. SPS experiments were performed at 1600 and 1900 degrees C with 65 MPa pressure and 1 min holding time. A maximum relative density around 95% was obtained after SPS processing of ZrB2 at 1900 degrees C while the density of ZrB2 sample sintered at 1600 degrees C reached 88% of the theoretical density. Hardness and fracture toughness values are 11 GPa and 4.11 MPa m(1/2) for the sample sintered at 1600 degrees C and 13.7 GPa and 2.65 MPa m(1/2) for the sample sintered at 1900 degrees C, respectively.
引用
收藏
页码:127 / 130
页数:4
相关论文
共 50 条
[31]   Spark plasma sintering of combustion-synthesized β-SiAlON powders [J].
Yi, Xuemei ;
Guo, Ran ;
Liu, Xiongzhang ;
Zhang, Weiguo ;
Yan, Fengxin .
CERAMICS INTERNATIONAL, 2016, 42 (06) :6707-6712
[32]   Spark Plasma Sintering of Ceramic Matrix Composite of ZrB2 and TiB2: Microstructure, Densification, and Mechanical Properties—A Review [J].
S. D. Oguntuyi ;
O. T. Johnson ;
M. B. Shongwe .
Metals and Materials International, 2021, 27 :2146-2159
[33]   Spark plasma sintering of novel ZrB2-SiC-TiSi2 composites with better mechanical properties [J].
Gupta, Neha ;
Mukhopadhyay, Amartya ;
Pavani, K. ;
Basu, Bikramjit .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 534 :111-118
[34]   Mechanical properties and ablation behavior of ZrB2-SiC ceramics fabricated by spark plasma sintering [J].
Zhang, Xiang ;
Liu, Rutie ;
Xiong, Xiang ;
Chen, Zhaoke .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 :120-125
[35]   Solid solution formation during spark plasma sintering of ZrB2-TiC-graphite composites [J].
Istgaldi, Hamid ;
Asl, Mehdi Shahedi ;
Shahi, Peyman ;
Nayebi, Behzad ;
Ahmadi, Zohre .
CERAMICS INTERNATIONAL, 2020, 46 (03) :2923-2930
[36]   Microstructure and properties of ZrB2-SiC and HfB2-SiC composites fabricated by spark plasma sintering (SPS) using TaSi2 as sintering aid [J].
Hu, Chunfeng ;
Sakka, Yoshio ;
Jang, Byungkoog ;
Tanaka, Hidehiko ;
Nishimura, Toshiyuki ;
Guo, Shuqi ;
Grasso, Salvatore .
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2010, 118 (1383) :997-1001
[37]   Spark plasma sintering of quadruplet ZrB2-SiC-ZrC-Cf composites [J].
Adibpur, Farhad ;
Tayebifard, Seyed Ali ;
Zakeri, Mohammad ;
Asl, Mehdi Shahedi .
CERAMICS INTERNATIONAL, 2020, 46 (01) :156-164
[38]   Crystal-size dependence of the spark-plasma-sintering kinetics of ZrB2 ultra-high-temperature ceramics [J].
Zamora, V. ;
Ortiz, A. L. ;
Guiberteau, F. ;
Nygren, M. .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (02) :271-276
[39]   Comparison of ZrB2-SiC ceramics with Yb2O3 additive prepared by hot pressing and spark plasma sintering [J].
Guo, Wei-Ming ;
Yang, Zhen-Guo ;
Zhang, Guo-Jun .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2011, 29 (04) :452-455
[40]   Effect of graphite addition on the spark-plasma sinterability of ZrB2 and ZrB2-SiC ultra-high-temperature ceramics [J].
Zamora, Victor ;
Nygren, Mats ;
Guiberteau, Fernando ;
Ortiz, Angel L. .
CERAMICS INTERNATIONAL, 2014, 40 (07) :11457-11464