Spark plasma sintering of ZrB2 powders synthesized by citrate gel method

被引:9
作者
Gocmez, Hasan [1 ]
Tuncer, Mustafa [1 ]
Bogomol, Iurii [2 ]
机构
[1] Dumlupinar Univ, Dept Mat Sci & Engn, Kutahya, Turkey
[2] Natl Tech Univ Ukraine, Igor Sikorsky Kyiv Polytech Inst, Dept Hightemp Mat & Powder Met, Kiev, Ukraine
关键词
Zirconium diboride; Spark plasma sintering; Hardness; Fracture toughness; HIGH-TEMPERATURE CERAMICS; MECHANICAL-PROPERTIES; ZRB2-BASED COMPOSITES; PHYSICAL-PROPERTIES; DENSIFICATION; MICROSTRUCTURE; B4C;
D O I
10.1016/j.ijrmhm.2018.09.008
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The densification behavior of nanocrystalline zirconium diboride (ZrB2) powders with nickel (5 vol%) is reported by spark plasma sintering (SPS) technique. SPS experiments were performed at 1600 and 1900 degrees C with 65 MPa pressure and 1 min holding time. A maximum relative density around 95% was obtained after SPS processing of ZrB2 at 1900 degrees C while the density of ZrB2 sample sintered at 1600 degrees C reached 88% of the theoretical density. Hardness and fracture toughness values are 11 GPa and 4.11 MPa m(1/2) for the sample sintered at 1600 degrees C and 13.7 GPa and 2.65 MPa m(1/2) for the sample sintered at 1900 degrees C, respectively.
引用
收藏
页码:127 / 130
页数:4
相关论文
共 50 条
  • [21] Fabrication of (Zr,Ti)B2-ZrN-BN composites through reactive spark plasma sintering of ZrB2 and TiN
    Ahmadi, Zohre
    Asl, Mehdi Shahedi
    Zakeri, Mohammad
    Farvizi, Mohammad
    MICRON, 2022, 154
  • [22] Morphology evolution of ZrB2 nanoparticles synthesized by sol-gel method
    Zhang, Yun
    Li, Ruixing
    Jiang, Yanshan
    Zhao, Bin
    Duan, Huiping
    Li, Junping
    Feng, Zhihai
    JOURNAL OF SOLID STATE CHEMISTRY, 2011, 184 (08) : 2047 - 2052
  • [23] Microstructure control and toughening of ZrB2-SiC/Zr-Al-C composite ceramics by selecting additional powders mixed with ZrB2 in ball milling for spark plasma sintering
    Guo, Qilong
    Juvencio Da Silva, Caio
    Bourgeois, Briley
    Luo, Sijun
    Ma, Hanghai
    Li, Junguo
    Zhang, Lianmeng
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2018, 126 (01) : 16 - 20
  • [24] Combined role of SiC particles and SiC whiskers on the characteristics of spark plasma sintered ZrB2 ceramics
    Pazhouhanfar, Yaghoub
    Namini, Abbas Sabahi
    Shaddel, Shahrzad
    Ahmadi, Zohre
    Asl, Mehdi Shahedi
    CERAMICS INTERNATIONAL, 2020, 46 (05) : 5773 - 5778
  • [25] Spark plasma sintering of ZrB2 using Al3BC3 as an additive
    Jung, Jin-Young
    Jung, Se-Hyuk
    Oh, Hyeon-Cheol
    Lee, Sea-Hoon
    Choi, Sung-Churl
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2012, 13 (05): : 641 - 645
  • [26] Effect of ZrB2 and SiC addition on TiB2-based ceramic composites prepared by spark plasma sintering
    Li, Bin
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 46 : 84 - 89
  • [27] Microstructural development during spark plasma sintering of ZrB2-SiC-Ti composite
    Ghasali, Ehsan
    Asl, Mehdi Shahedi
    CERAMICS INTERNATIONAL, 2018, 44 (15) : 18078 - 18083
  • [28] Conventional and spark-plasma sintering of cordierite powders synthesized by sol-gel methods
    El-Buaishi, Nozhat Moftah
    Veljovic, Djordje
    Jokic, Bojan
    Radovanovic, Zeljko
    Steins, Ints
    Janackovic, Djordje
    Petrovic, Rada
    CERAMICS INTERNATIONAL, 2013, 39 (05) : 5845 - 5854
  • [29] Effect of ZrB2 Particle Size on Pressureless Sintering of ZrB2 - β-Sic Composites
    da Roch, Rosa Maria
    Sene, Rank Ferrer
    Juliani, Ariah de Oliveira
    Davi, Caroline Oliveira
    JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT, 2019, 11
  • [30] Preparation and Properties of ZrB2-Cu Composites by Spark Plasma Sintering
    Zhu, S. Z.
    Gong, D. L.
    Fang, Z.
    Xu, Q.
    HIGH-PERFORMANCE CERAMICS VII, PTS 1 AND 2, 2012, 512-515 : 739 - +