Spark plasma sintering of ZrB2 powders synthesized by citrate gel method

被引:9
|
作者
Gocmez, Hasan [1 ]
Tuncer, Mustafa [1 ]
Bogomol, Iurii [2 ]
机构
[1] Dumlupinar Univ, Dept Mat Sci & Engn, Kutahya, Turkey
[2] Natl Tech Univ Ukraine, Igor Sikorsky Kyiv Polytech Inst, Dept Hightemp Mat & Powder Met, Kiev, Ukraine
关键词
Zirconium diboride; Spark plasma sintering; Hardness; Fracture toughness; HIGH-TEMPERATURE CERAMICS; MECHANICAL-PROPERTIES; ZRB2-BASED COMPOSITES; PHYSICAL-PROPERTIES; DENSIFICATION; MICROSTRUCTURE; B4C;
D O I
10.1016/j.ijrmhm.2018.09.008
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The densification behavior of nanocrystalline zirconium diboride (ZrB2) powders with nickel (5 vol%) is reported by spark plasma sintering (SPS) technique. SPS experiments were performed at 1600 and 1900 degrees C with 65 MPa pressure and 1 min holding time. A maximum relative density around 95% was obtained after SPS processing of ZrB2 at 1900 degrees C while the density of ZrB2 sample sintered at 1600 degrees C reached 88% of the theoretical density. Hardness and fracture toughness values are 11 GPa and 4.11 MPa m(1/2) for the sample sintered at 1600 degrees C and 13.7 GPa and 2.65 MPa m(1/2) for the sample sintered at 1900 degrees C, respectively.
引用
收藏
页码:127 / 130
页数:4
相关论文
共 50 条
  • [1] Influence of the heating rate on the in situ synthesis and consolidation of ZrB2 by reactive Spark Plasma Sintering
    Licheri, R.
    Musa, C.
    Orru, R.
    Cao, G.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2015, 35 (04) : 1129 - 1137
  • [2] In situ synthesis and sintering of ZrB2 porous ceramics by the spark plasma sintering-reactive synthesis (SPS-RS) method
    Yuan, Huiping
    Li, Junguo
    Shen, Qiang
    Zhang, Lianmeng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 34 : 3 - 7
  • [3] The fabrication and mechanical properties of SiC/ZrB2 laminated ceramic composite prepared by spark plasma sintering
    Wang, Hailong
    Fan, Bingbing
    Feng, Lun
    Chen, Deliang
    Lu, Hongxia
    Xu, Hongliang
    Wang, Chang-An
    Zhang, Rui
    CERAMICS INTERNATIONAL, 2012, 38 (06) : 5015 - 5022
  • [4] ZrB2-SiCw ceramic composites synthesized by in situ reaction and spark plasma sintering
    Zhao, Xiaotong
    Shao, Gang
    Feng, Lun
    Wang, Hailong
    Fan, Bingbing
    Lu, Hongxia
    Xu, Hongliang
    Chen, Deliang
    Zhang, Rui
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2017, 14 (05) : 845 - 850
  • [5] Synthesis of the ZrN–ZrB2 Composite by Spark Plasma Sintering
    O. S. Petukhov
    A. V. Ragulya
    H. Yu. Borodianska
    Powder Metallurgy and Metal Ceramics, 2019, 58 : 416 - 430
  • [6] SPARK PLASMA SINTERING AND STRUCTURAL PROPERTIES OF ZrB2 BASED CERAMICS: A REVIEW
    Chakraborty, S.
    Das, P. K.
    Ghosh, D.
    REVIEWS ON ADVANCED MATERIALS SCIENCE, 2016, 44 (02) : 182 - 193
  • [7] Preparation and thermal conductivity characterization of ZrB2 porous ceramics fabricated by spark plasma sintering
    Yuan, Huiping
    Li, Junguo
    Shen, Qiang
    Zhang, Lianmeng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2013, 36 : 225 - 231
  • [8] Preparation and Microstructure of Porous ZrB2 Ceramics Using Reactive Spark Plasma Sintering Method
    Yuan Huiping
    Li Junguo
    Shen Qiang
    Zhang Lianmeng
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2015, 30 (03): : 512 - 515
  • [9] ZrB2-CNTs Nanocomposites Fabricated by Spark Plasma Sintering
    Jin, Hua
    Meng, Songhe
    Xie, Weihua
    Xu, Chenghai
    Niu, Jiahong
    MATERIALS, 2016, 9 (12):
  • [10] ZrB2-SiC-G Composite Prepared by Spark Plasma Sintering of In-Situ Synthesized ZrB2-SiC-C Composite Powders
    Cheng, YeHong
    Qi, Yushi
    Hu, Ping
    Zhou, Shanbao
    Chen, Guiqing
    An, Jiadong
    Jin, Kunfeng
    Han, Wenbo
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2016, 99 (06) : 2131 - 2137