Simulation of the Measurement by Scanning Electron Microscopy of Edge and Linewidth Roughness Parameters in Nanostructures

被引：0

作者：

Ciappa, Mauro ^{[1
]}

Ilgunsatiroglu, Emre ^{[1
]}

Illarionov, Alexey Yu. ^{[1
]}

机构：

[1] Swiss Fed Inst Technol, Integrated Syst Lab, Zurich, Switzerland

来源：

2015 JOINT INTERNATIONAL EUROSOI WORKSHOP AND INTERNATIONAL CONFERENCE ON ULTIMATE INTEGRATION ON SILICON (EUROSOI-ULIS) | 2015年

关键词：

Metrology; Scanning Electron Microscopy; Critical Dimensions; Line Edge Roughness; Monte Carlo Modeling;

D O I：

暂无

中图分类号：

TP3 [计算技术、计算机技术];

学科分类号：

0812 ;

摘要：

Uncertainties in the sub-nanometer range, the use of new materials, roughness, and the three-dimensional structures represent main challenges for the metrology of critical dimensions in nanostructures. In this paper, realistic PMMA lines in the 40nm range are generated by full 3D process simulation and the corresponding secondary electron SEM image is obtained by Monte Carlo simulation. Line Edge and Line Width Roughness parameters are extracted from the simulated SEM image and compared with the parameters obtained from the true geometry.

引用

页码：205 / 208

页数：4

共 50 条

[21] SURFACE ROUGHNESS MEASUREMENT BY SCANNING ELECTRON MICROSCOPE (SEM).
Sato, Hisayoshi
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1983, 49 (438): : 227 - 234
[22] Application of scanning tunneling microscopy on the roughness measurement of metal surface
Yang, Zhigang
Wang, Jiajun
Bo, Xiangzheng
Fang, Hongsheng
Jinshu Rechuli/Heat Treatment of Metals, 1995, (11): : 24 - 26
[23] Measurement of Wenzel roughness factor by laser scanning confocal microscopy
Ai Hongru
Li Xiangqin
Shi Shuyan
Zhang Ying
Liu Tianqing
RSC ADVANCES, 2017, 7 (12) : 7052 - 7059
[24] Monte Carlo Modeling of the Extraction of Roughness Parameters at Nanometer Scale by Critical Dimension Scanning Electron Microscopy
Ciappa, M.
Ilguensatiroglu, E.
Illarionov, A. Yu.
Filosomi, F.
Santini, C.
PROCEEDINGS OF THE 2014 44TH EUROPEAN SOLID-STATE DEVICE RESEARCH CONFERENCE (ESSDERC 2014), 2014, : 357 - 360
[25] Scanning Electron Microscopy and Roughness Study of Dental Composite Degradation
Silva Soares, Luis Eduardo
Cortez, Louise Ribeiro
Zarur, Raquel de Oliveira
Martin, Airton Abrahao
MICROSCOPY AND MICROANALYSIS, 2012, 18 (02) : 289 - 294
[26] Determination of line edge roughness in low-dose top-down scanning electron microscopy images
Verduin, Thomas
Kruit, Pieter
Hagen, Cornelis W.
JOURNAL OF MICRO-NANOLITHOGRAPHY MEMS AND MOEMS, 2014, 13 (03):
[27] Simulation of Spatially Resolved Electron Energy Loss Near-Edge Structure for Scanning Transmission Electron Microscopy
Prange, M. P.
Oxley, M. P.
Varela, M.
Pennycook, S. J.
Pantelides, S. T.
PHYSICAL REVIEW LETTERS, 2012, 109 (24)
[28] Observation and formation of Si nanostructures by scanning reflection electron microscopy
Ichikawa, M
Fujita, S
Maruno, S
Watanabe, H
Fujita, K
ELECTRON, 1998, : 389 - 396
[29] Simulation of high angle annular dark field scanning transmission electron microscopy images of large nanostructures
Pizarro, J.
Galindo, P. L.
Guerrero, E.
Yanez, A.
Guerrero, M. P.
Rosenauer, A.
Sales, D. L.
Molina, S. I.
APPLIED PHYSICS LETTERS, 2008, 93 (15)
[30] Measurement of the parameters of the electron beam of a scanning electron microscope
Gavrilenko, V. P.
Novikov, Yu. A.
Rakov, A. V.
Todua, P. A.
INSTRUMENTATION, METROLOGY, AND STANDARDS FOR NANOMANUFACTURING II, 2008, 7042

← 1 2 3 4 5 →