Study of Exit Burr Formation of CFRP

被引：8

作者：

Ji, W. ^{[1
]}

Wang, Y. W. ^{[1
]}

Li, Y. F. ^{[1
]}

Yan, F. G. ^{[1
]}

Liu, X. L. ^{[1
]}

机构：

[1] Harbin Univ Sci & Tech, Key Lab Adv Mfg Tech & Cutting Tools, Harbin 150080, Peoples R China

来源：

HIGH SPEED MACHINING | 2011年 / 188卷

关键词：

CFRP; Burr; Fiber direction; Tool geometry;

D O I：

10.4028/www.scientific.net/AMR.188.154

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Microcosmic and macroscopic form of CFRP holes drilled by new PCD tool were observed in this paper. Location and distribution of burr and fiber direction of burr were analyzed, and formation mechanism of burr of CFRP hole exit is studied tentatively. The methods of inhibit the formation of burr formation were put forward from the design principles of the tool geometry parameters.

引用

页码：154 / 157

页数：4

共 50 条

[41] Researches on Burr Formation in Milling Al-Alloy [J].

Chen, Ming ;

Rong, Bin ;

Liu, Gang .

SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 :164-+

[42] Machining-induced burr distribution along hole contours in unidirectional carbon fibre-reinforced polymer (UD-CFRP) composites [J].

Geier, Norbert ;

Magyar, Gergely .

COMPOSITES PART C: OPEN ACCESS, 2025, 18

[43] An analytical model to predict interlayer burr size following drilling of CFRP-metallic stack assemblies [J].

Hassan, Ali Abdelhafeez ;

Soo, Sein Leung ;

Aspinwall, David K. ;

Arnold, Dick ;

Dowson, Anthony .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2020, 69 (01) :109-112

[44] Investigation of burr formation and surface roughness in drilling engineering plastics [J].

Altan, Mihrigul ;

Altan, Erhan .

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2014, 36 (02) :347-354

[45] Investigation of chip formation and burr control in PCB fixture hole [J].

Huang, Lixin .

CIRCUIT WORLD, 2015, 41 (02) :61-69

[46] Aspects of burr formation in bandsaw teeth manufactured by milling operation [J].

Sarwar, Mohammed ;

Haider, Julfikar .

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2010, 26 (06) :596-601

[47] Investigation of burr formation and surface roughness in drilling engineering plastics [J].

Mihrigul Altan ;

Erhan Altan .

Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2014, 36 :347-354

[48] Mechanism of burr formation in slot milling al-alloy [J].

Luo, M. ;

Liu, G. ;

Chen, M. .

ADVANCES IN ABRASIVE MACHINING AND SURFACING TECHNOLOGIES, PROCEEDINGS, 2006, :127-+

[49] Mechanism of burr formation in slot milling Al-alloy [J].

Luo, M. ;

Liu, G. ;

Chen, M. .

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2008, 31 (01) :63-71

[50] Analysis of exit delamination mechanism and critical axial force in ball helical milling of CFRP [J].

Wang, Haiyan ;

Yu, Wanchun ;

Feng, Yan ;

Wang, Qingchao .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2024, 238 (22) :10717-10732

← 1 2 3 4 5 →