Mixed mode-I/II fatigue performance of Cement Emulsified Asphalt Mortar: Experimental and statistical analysis at intermediate temperature

被引：21

作者：

Najjar, Shima ^{[1
]}

Moghaddam, Abolfazl Mohammadzadeh ^{[1
]}

Sahaf, Ali ^{[1
]}

Aliha, M. R. M. ^{[2
]}

机构：

[1] Ferdowsi Univ Mashhad, Dept Civil Engn, Mashhad, Iran

[2] Iran Univ Sci & Technol IUST, Welding & Joining Res Ctr, Sch Ind Engn, Tehran, Iran

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2022年 / 350卷

关键词：

Fatigue life; Mixed-mode I/II loadings; Cement emulsified asphalt mortar; Response surface method; Mix design; Semi-circular bending; MECHANICAL-PROPERTIES; FRACTURE-TOUGHNESS; MIXTURES; BEHAVIOR; RESISTANCE; PAVEMENT; EVALUATE; FIBER;

D O I：

10.1016/j.conbuildmat.2022.128835

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This study has investigated fatigue life of Cement Emulsified Asphalt Mortar (CEAM) under mixed-mode I/II loadings at the intermediate temperature. For this investigation, SCB specimens of 16 randomized mixture designs with different cement contents (C), asphalt-to-cement ratios (A/C), and water-to-cement ratios (W/C) were prepared and subjected to the cyclic mixed tensile-shear loading with M-e = 0, 0.5, 1.0 at three frequencies of 2, 4 and 8 Hz. The results were analyzed using the moptimal response surface method and revealed that for all three loading modes, the fatigue life increased with increasing C and A/C. The CEAM also showed a longer fatigue life in the pure shear mode than in the pure tensile mode. The difference between the fatigue life of mode I and II was found to be increasing with the increase in cement content and loading frequency. Increasing the loading frequency increased the fatigue life of the mortar in all three modes.

引用

页数：20

共 68 条

[41] Full range I/II fracture behavior of asphalt mixtures containing RAP and rejuvenating agent using two different 3-point bend type configurations [J].

Saed, Seyed Ataollah ;

Karimi, Hamid Reza ;

Rad, Sina Mousavi ;

Aliha, M. R. M. ;

Shi, Xijun ;

Haghighatpour, Pegah Jafari .

CONSTRUCTION AND BUILDING MATERIALS, 2022, 314

[42] Modulus prediction of asphalt mixtures using dynamic semicircular bending test: Estimation algorithm and nomograph development [J].

Saha, Gourab ;

Biligiri, Krishna Prapoorna .

INTERNATIONAL JOURNAL OF FATIGUE, 2018, 109 :137-144

[43] Fracture damage evaluation of asphalt mixtures using Semi-Circular Bending test based on fracture energy approach [J].

Saha, Gourab ;

Biligiri, Krishna Prapoorna .

ENGINEERING FRACTURE MECHANICS, 2015, 142 :154-169

[44] Fatigue Performance of the CA Mortar Used in CRTS I Ballastless Slab Track under Simulated Servicing Condition [J].

Shan, Yuchuan ;

Zheng, Shuguang ;

Zhang, Xuefeng ;

Luo, Wei ;

Mao, Jingda ;

Kong, Deyu .

MATERIALS, 2018, 11 (11)

[45] Influence of specimen geometry on mode I fracture toughness of asphalt concrete [J].

Si Fuan ;

Ma Ke ;

Liu Kanghe ;

Li Kun ;

Aliha, M. R. M. .

CONSTRUCTION AND BUILDING MATERIALS, 2021, 276

[46] Feasibility study of asphalt-modified mortars using asphalt emulsion [J].

Song, H ;

Do, J ;

Soh, Y .

CONSTRUCTION AND BUILDING MATERIALS, 2006, 20 (05) :332-337

[47] Experimental study on dynamic fracture behaviors of Beishan NSCB and CCNSCB granite specimens under different loading rates [J].

Song, Yao ;

Yue, Zhongwen .

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING, 2021, 141

[48] A new mixed-mode fracture criterion of anisotropic rock [J].

Sun, Dong-Liang ;

Rao, Qiu-hua ;

Wang, Shan-Yong ;

Yi, Wei ;

Shen, Qing-qing .

ENGINEERING FRACTURE MECHANICS, 2021, 248 (248)

[49] A novel method to evaluate the setting process of cement and asphalt emulsion in CA mortar [J].

Wang, Fazhou ;

Liu, Zhichao ;

Wang, Tao ;

Hu, Shuguang .

MATERIALS AND STRUCTURES, 2008, 41 (04) :643-647

[50] Research on the Fatigue Behavior of Cement Asphalt Mortar Exposed to Water [J].

Wang Fazhou ;

Yang Jin ;

Hu Shuguang ;

Zhang Yunhua ;

Liu Yunpeng .

PROGRESS IN POLYMERS IN CONCRETE, 2013, 687 :274-281

← 1 2 3 4 5 6 7 →