Influence of process parameters on the tensile properties of DREF-3000 friction spun hybrid yarns consisting of waste staple carbon fiber for thermoplastic composites

被引：18

作者：

Hasan, Mir Mohammad Badrul ^{[1
]}

Nitsche, Stefanie ^{[1
]}

Abdkader, Anwar ^{[1
]}

Cherif, Chokri ^{[1
]}

机构：

[1] Tech Univ Dresden, George Bahr Str 3c, D-01062 Dresden, Germany

来源：

TEXTILE RESEARCH JOURNAL | 2019年 / 89卷 / 01期

关键词：

carbon fiber; friction spinning; tensile property; PART-I;

D O I：

10.1177/0040517517736472

中图分类号：

TB3 [工程材料学]; TS1 [纺织工业、染整工业];

学科分类号：

0805 ; 080502 ; 0821 ;

摘要：

Due to their excellent strength, rigidity, and damping properties, as well as low weight, carbon fiber reinforced composites (CFRCs) are being widely used for load bearing structures. On the other hand, with an increased demand and usage of CFRCs, effective methods to re-use waste carbon fiber (CF) materials, which are recoverable either from process scraps or from end-of-life components, are attracting increased attention. In this paper, hybrid yarns consisting of waste staple CF (40 and 60 mm) and polyamide 6 staple fibers (60 mm) are manufactured on a DREF-3000 friction spinning machine with various process parameters, such as spinning drum speed, suction air pressure, and core-sheath ratio. The relationship between different textile physical properties of the hybrid yarns, such as tensile strength, elongation, and evenness with different spinning parameters, core-sheath ratio, and input CF length is revealed.

引用

页码：32 / 42

页数：11