Modelling and control of moisture transfers in high, intermediate and low aw composite food

Limitation of moisture transfer in composite food products can be achieved by two main techniques: reduction of a, difference between components and use of hydrophobic barrier at the interface of the system. Both techniques were tested in a multi-domain model food associating a dry cereal-based component to a wet component using a model based on Fick's second law. Required input modelling parameters were moisture equilibrium and transport properties of the components. The two stabilisation techniques permitted a significant extension of the period of acceptability of the dry component: from 7 min to more than 40 It using solutes addition and up to 12 days using a 300 m hydrophobic barrier. A further extension of this period of acceptability was achieved by combining the two techniques. However, this had a detrimental effect on the relative efficiency of the barrier due to increased internal resistance of the wet component. (c) 2007 Elsevier Ltd. All rights reserved.