SEISMIC MARGIN EVALUATION METHODS USING EQUIVALENT SDOF MODEL AND ELASTO-PLASTIC RESPONSE SPECTRUM

被引:0
|
作者
Onitsuka, Shohei [1 ]
Iijima, Tadashi [1 ]
Ushio, Yuichi [2 ]
Okuda, Yukihiko [3 ]
Hirai, Takamasa [4 ]
Inagaki, Katsuhisa [5 ]
机构
[1] Hitachi GE Nucl Energy Ltd, Hitachi, Ibaraki, Japan
[2] Hitachi Ltd, Hitachinaka, Ibaraki, Japan
[3] Toshiba Co Ltd, Yokohama, Kanagawa, Japan
[4] Mitsubishi Heavy Ind Co Ltd, Kobe, Hyogo, Japan
[5] Chubu Elect Power Co Inc, Nagoya, Aichi, Japan
来源
ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 8 | 2015年
关键词
D O I
暂无
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Two simplified methods for evaluating seismic margin due to elasto-plastic response were proposed. Generally, elasto-plastic response is evaluated by nonlinear time-history response analysis using three-dimensional FEM model (3D FEM model). It, however, takes an immense amount of time with commonly used computers. In order to evaluate it in a shorter time, this study developed seismic margin evaluation methods using Equivalent Single Degree Of Freedom (ESDOF) model and elasto-plastic response spectrum. Additionally, the accuracy of the two methods was verified by static loading tests and vibration tests. Simple cantilever test specimens with several natural frequencies were used in the vibration tests, and input waves with several frequency characteristics were applied to each vibration test. Response displacement, response acceleration of the test specimens and input acceleration were measured in each vibration test. Maximum displacement given by ESDOF model of the test specimens was compared with the corresponding measured values of each vibration test in order to verify the accuracy of ESDOF model. Difference between the maximum displacement given by the ESDOF model and the vibration tests was around 5%, and computation time of the ESDOF model was one-tenth of 3D FEM model of the test specimens. In addition, elasto-plastic response spectrum of input waves in the vibration tests were compared with measured yield accelerations of the specimens in 'order to verify the accuracy of elasto-plastic response spectrum. Difference between the calculated elasto-plastic response spectrum and the measured yield acceleration of the test specimens was around 10%, and computation time of elasto-plastic response spectrum was one-tenth of the 3D FEM model. As a result, it is concluded that ESDOF model and elasto-plastic response spectrum are powerful tool to evaluate seismic margin.
引用
收藏
页数:10
相关论文
共 50 条
  • [21] Evaluation of Elasto-Plastic Stresses Using Birefringent Coating Technique
    K. Ravisankar
    R. Narayanan
    T. Narayanan
    P. Baskaran
    Journal of Optics, 1997, 26 (3) : 105 - 115
  • [22] An investigation of P-delta effect in conventional seismic design and direct displacement-based design using elasto-plastic SDOF systems
    Nasir Pourali
    Horr Khosravi
    Mehdi Dehestani
    Bulletin of Earthquake Engineering, 2019, 17 : 313 - 336
  • [23] Reduction of large seismic deformations using elasto-plastic passive energy dissipaters
    Kumar, KS
    Muthumani, K
    Gopalakrishnan, N
    Sarma, BS
    Reddy, GR
    Parulekar, YM
    DEFENCE SCIENCE JOURNAL, 2003, 53 (01) : 95 - 103
  • [24] Effect of nonlinearity of restrainer and supports on the elasto-plastic seismic response of continuous girder bridge
    Wang Changfeng
    Long, Zhu
    Chen Xingchong
    FRATTURA ED INTEGRITA STRUTTURALE, 2014, Gruppo Italiano Frattura (30): : 486 - 494
  • [25] Response envelopes of the elasto-plastic S-CLAY1 model
    Zentar, Rachid
    Abriak, N. -E.
    Karstunen, A.
    Rangeard, D.
    NUMERICAL METHODS IN GEOTECHNICAL ENGINEERING, 2006, : 33 - +
  • [26] Elasto-plastic response of steel bridge pier base joint under seismic loading
    Sakano, Masahiro
    Nishigaki, Yuji
    Kawakami, Yoriko
    RELIABILITY AND OPTIMIZATION OF STRUCTURAL SYSTEMS: ASSESSMENT, DESIGN AND LIFE-CYCLE PERFORMANCE, 2007, : 227 - +
  • [28] Study on FE models in elasto-plastic seismic performance evaluation of steel arch bridge
    Tang, Zhanzhan
    Xie, Xu
    Wang, Tong
    Wang, Junzhe
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2015, 113 : 209 - 220
  • [29] A SIMPLIFIED ANALYSIS METHOD FOR ELASTO-PLASTIC SEISMIC RESPONSE USING THE ENERGY BALANCE EQUATION OF A MAXIMUM HYSTERESIS LOOP
    Nakamura, Gaku
    Okuda, Yukihiko
    Ebato, Shoichi
    Niwa, Hiroshi
    Iijima, Tadashi
    Hirai, Takamasa
    Inagaki, Katsuhisa
    ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2015, VOL 8, 2015,
  • [30] Elasto-plastic analysis of jointed rocks using discrete continuum and equivalent continuum approaches
    Latha, Gali Madhavi
    Garaga, Arunakumari
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2012, 53 : 56 - 63